General Samsung Washer Error Codes

1. Samsung Washer ND (No Drain)

Meaning: The Samsung washer isn’t draining water properly.
Solution: Check for clogs in the drain hose or pump, and ensure proper hose positioning.

2. Samsung Washer LE (Leakage Error)

Meaning: Water leakage detected inside the Samsung washer.
Solution: Inspect hoses, connections, and the drum for leaks.

3. Samsung Washer UE (Unbalanced Load)

Meaning: The load inside the Samsung washer drum is unevenly distributed.
Solution: Redistribute the laundry evenly and remove heavy items.

4. Samsung Washer dE (Door Error)

Meaning: The Samsung washer door is open or not locked properly.
Solution: Ensure the door is securely closed and inspect the latch.

5. Samsung Washer 4E (Water Supply Error)

Meaning: The Samsung washer isn’t filling with water.
Solution: Check water supply hoses, valves, and pressure.

6. Samsung Washer HE (Heating Error)

Meaning: The heating element in the Samsung washer isn’t functioning correctly.
Solution: Inspect the heater element and replace it if faulty.

7. Samsung Washer SUD (Excessive Suds)

Meaning: Too much detergent or suds detected in the Samsung washer.
Solution: Use high-efficiency (HE) detergent and reduce the amount.

8. Samsung Washer 3E (Motor Error)

Meaning: Motor malfunction or communication error in the Samsung washer.
Solution: Inspect the motor and control board for issues.

9. Samsung Washer tE (Temperature Sensor Error)

Meaning: The temperature sensor in the Samsung washer isn’t functioning.
Solution: Test the sensor and replace it if necessary.

10. Samsung Washer bE (Button Error)

Meaning: A button on the Samsung washer control panel is stuck.
Solution: Clean or replace the button or control panel.

Water and Drainage Samsung Washer Error Codes

11. Samsung Washer 5E (Water Not Draining)

Meaning: Water isn’t draining properly in the Samsung washer.
Solution: Clear the drain pump filter and hose.

12. Samsung Washer 1E (Water Level Sensor Error)

Meaning: Faulty water level sensor in the Samsung washer.
Solution: Inspect and replace the sensor if required.

13. Samsung Washer OE (Overflow Error)

Meaning: The Samsung washer detects too much water.
Solution: Check the water inlet valve and drainage system.

14. Samsung Washer LC (Leakage Error)

Meaning: Leakage detected inside the Samsung washer.
Solution: Inspect internal connections and hoses.

15. Samsung Washer 4C (Water Supply Issue)

Meaning: The water supply to the Samsung washer is restricted.
Solution: Ensure hoses aren’t kinked, and water pressure is sufficient.

16. Samsung Washer 9E1 (Power Error)

Meaning: Voltage issues detected in the Samsung washer.
Solution: Use a proper voltage stabilizer or check your power source.

Drum and Motor Samsung Washer Error Codes

17. Samsung Washer 3C (Motor Error)

Meaning: The motor in the Samsung washer is not working properly.
Solution: Inspect motor connections and the main control board.

18. Samsung Washer DC (Unbalanced Load)

Meaning: The load in the Samsung washer drum is uneven.
Solution: Balance the load in the washer.

19. Samsung Washer 1DC (Lid Open Error)

Meaning: The lid of the Samsung washer isn’t closed properly.
Solution: Ensure the lid is securely latched.

20. Samsung Washer 8C (Vibration Sensor Error)

Meaning: Faulty vibration sensor in the Samsung washer.
Solution: Inspect and replace the vibration sensor if needed.

Heating and Cooling Samsung Washer Error Codes

21. Samsung Washer HE1 (Heating Element Overheating)

Meaning: The heating element in the Samsung washer is too hot.
Solution: Replace the heating element if necessary.

22. Samsung Washer HC1 (Heater Error)

Meaning: Heater malfunction detected in the Samsung washer.
Solution: Inspect the heater and thermistor.

23. Samsung Washer tC1 (Thermistor Error)

Meaning: The thermistor in the Samsung washer isn’t reading temperatures correctly.
Solution: Replace the thermistor.

Door and Lock Samsung Washer Error Codes

24. Samsung Washer DE1 (Door Lock Error)

Meaning: The Samsung washer door lock isn’t working.
Solution: Inspect and replace the door lock mechanism.

25. Samsung Washer DE2 (Door Unlock Error)

Meaning: The Samsung washer door cannot unlock.
Solution: Reset the washer and test the door system.

26. Samsung Washer LC2 (Leakage in Door Area)

Meaning: Water leakage near the Samsung washer door.
Solution: Inspect the door seal for damage.

27. Samsung Washer dF (Door Not Closing)

Meaning: The Samsung washer door isn’t closing properly.
Solution: Check for obstructions and inspect the hinges.

Electrical and Control Samsung Washer Error Codes

28. Samsung Washer SE (Signal Error)

Meaning: A control signal error is detected in the Samsung washer.
Solution: Inspect control panel connections and replace if needed.

29. Samsung Washer UC (Voltage Error)

Meaning: Incorrect voltage detected in the Samsung washer.
Solution: Ensure a stable power supply to the washer.

30. Samsung Washer AC6 (Control Unit Error)

Meaning: The main control unit of the Samsung washer has a problem.
Solution: Replace or repair the main control board.

Advanced Samsung Washer Error Codes

31. Samsung Washer 9C1 (Power Supply Error)

Meaning: Inconsistent power supply detected in the Samsung washer.
Solution: Use a voltage regulator or contact an electrician.

32. Samsung Washer C5 (Coolant Issue)

Meaning: Cooling system error in the Samsung washer.
Solution: Inspect the cooling system components.

33. Samsung Washer E6 (Signal Interference)

Meaning: Internal communication signal issue in the Samsung washer.
Solution: Test and replace wiring or connectors.

34. Samsung Washer 4AC (Control Unit Overload)

Meaning: Overloading in the Samsung washer control system.
Solution: Reset the washer and test the control board.

35. Samsung Washer 1E3 (Heater Sensor Issue)

Meaning: Faulty heater sensor readings in the Samsung washer.
Solution: Replace the heater sensor.

General Samsung Dryer Error Codes

1. Samsung Dryer HE (Heating Error)

Meaning: The Samsung dryer is not heating properly.
Solution: Inspect the heating element, thermostat, or thermal fuse.

2. Samsung Dryer tS/tO (Temperature Sensor Error)

Meaning: There is an issue with the temperature sensor (thermistor).
Solution: Test the thermistor and replace it if faulty.

3. Samsung Dryer dF (Door Error)

Meaning: The Samsung dryer door is not closing or locking properly.
Solution: Check the door latch and hinges for damage or misalignment.

4. Samsung Dryer bE (Button Error)

Meaning: A button on the control panel is stuck.
Solution: Clean or replace the control panel if the button remains stuck.

5. Samsung Dryer 1 AC (Communication Error)

Meaning: Communication failure between the main PCB and sub PCB.
Solution: Inspect and replace faulty wiring or PCB boards.

6. Samsung Dryer HC (High Temperature Error)

Meaning: The dryer is overheating.
Solution: Check for blocked vents or a malfunctioning thermostat.

7. Samsung Dryer 3E (Motor Error)

Meaning: The motor is not functioning properly.
Solution: Inspect motor connections and replace the motor if necessary.

8. Samsung Dryer SUD (Excessive Suds)

Meaning: Excessive foam detected in the Samsung dryer.
Solution: Ensure that only appropriate detergent is being used, even if washing occurs before drying.

Airflow and Ventilation Samsung Dryer Error Codes

9. Samsung Dryer 4C (Water Supply Error - For Steam Models)

Meaning: Water supply for steam function is restricted.
Solution: Check the water hose for kinks or clogs and ensure proper water pressure.

10. Samsung Dryer 5C (Drainage Error - For Steam Models)

Meaning: Water is not draining properly from the steam dryer.
Solution: Inspect and clear the drainage system.

11. Samsung Dryer dC (Drying Sensor Error)

Meaning: The drying sensor is not detecting moisture levels properly.
Solution: Clean the sensor bars inside the dryer drum.

12. Samsung Dryer 9C1 (Power Error)

Meaning: There is an inconsistent or incorrect power supply.
Solution: Ensure proper voltage and use a stabilizer if necessary.

13. Samsung Dryer AC (Ambient Sensor Error)

Meaning: Ambient temperature is outside the Samsung dryer’s operating range.
Solution: Operate the dryer in a room-temperature environment.

Drum and Motor Samsung Dryer Error Codes

14. Samsung Dryer tE (Thermistor Error)

Meaning: The thermistor isn’t working properly.
Solution: Replace the thermistor.

15. Samsung Dryer DC (Door Circuit Error)

Meaning: The door sensor isn’t functioning.
Solution: Check the door switch for connectivity issues.

16. Samsung Dryer 1E (Water Level Sensor Error - For Steam Models)

Meaning: The water level sensor is malfunctioning.
Solution: Inspect and replace the sensor if needed.

17. Samsung Dryer 2E (Control Board Error)

Meaning: The control board isn’t operating correctly.
Solution: Replace the main control board.

Heating and Temperature Samsung Dryer Error Codes

18. Samsung Dryer HC2 (Overheating)

Meaning: The dryer is overheating due to poor ventilation or faulty components.
Solution: Clean the vents and check the thermostat.

19. Samsung Dryer FE (Fan Motor Error)

Meaning: The fan motor is not working properly.
Solution: Test the fan motor and replace if needed.

20. Samsung Dryer DE (Door Error)

Meaning: The door is not properly closed or locked.
Solution: Inspect the door lock mechanism and ensure the latch works.

Electrical and Control Samsung Dryer Error Codes

21. Samsung Dryer 1 AC7 (Main PCB Error)

Meaning: The main PCB has a fault.
Solution: Replace the main PCB if resetting the dryer doesn’t work.

22. Samsung Dryer 9E2 (Low Voltage Error)

Meaning: The Samsung dryer detects low power voltage.
Solution: Verify proper voltage supply and use a stabilizer if required.

23. Samsung Dryer AC3 (Sub PCB Error)

Meaning: The sub PCB is not communicating properly.
Solution: Inspect wiring between the main and sub PCB, and replace if necessary.

Advanced Samsung Dryer Error Codes

24. Samsung Dryer C5 (Compressor Error - For Heat Pump Models)

Meaning: There is a problem with the heat pump compressor.
Solution: Call a technician to inspect and repair the heat pump system.

25. Samsung Dryer E6 (Communication Error)

Meaning: Communication signal between internal components is faulty.
Solution: Test internal wiring and PCB boards for defects.

26. Samsung Dryer 4AC (Control Unit Overload)

Meaning: The control board is overloaded.
Solution: Reset the dryer and inspect the board.

27. Samsung Dryer FC (Filter Check Error)

Meaning: Lint filter or vent is clogged.
Solution: Clean the lint filter and vent to improve airflow.

General Samsung Refrigerator Error Codes

1. Samsung Refrigerator 1E (Power Outage)

Meaning: The refrigerator experienced a power outage or restart.
Solution: Reset the refrigerator by holding the power button or unplugging it for 5 minutes.

2. Samsung Refrigerator 5E (Defrost Error)

Meaning: The defrost system isn’t functioning properly.
Solution: Inspect the defrost heater, thermostat, and control board.

3. Samsung Refrigerator 22E (Fan Error)

Meaning: The refrigerator fan isn’t working properly.
Solution: Inspect and clean the fan or replace it if necessary.

4. Samsung Refrigerator 88 88 (Communication Error)

Meaning: There’s a communication failure between the control panel and other components.
Solution: Reset the refrigerator and check wiring connections.

5. Samsung Refrigerator 33E (Heater Error)

Meaning: There’s an issue with the heater in the refrigerator.
Solution: Test the heater system and replace if faulty.

Cooling and Temperature Samsung Refrigerator Error Codes

6. Samsung Refrigerator 41E (Ice Maker Sensor Error)

Meaning: The ice maker sensor is malfunctioning.
Solution: Check the ice maker sensor and replace it if needed.

7. Samsung Refrigerator 84C (Overheating Error)

Meaning: The refrigerator is overheating.
Solution: Ensure proper ventilation around the refrigerator.

8. Samsung Refrigerator PC ER (Touch Panel Error)

Meaning: Touch panel communication issue.
Solution: Check panel connections or replace the touch panel.

9. Samsung Refrigerator 14E (Evaporator Sensor Error)

Meaning: Faulty evaporator sensor detected.
Solution: Inspect and replace the evaporator sensor.

10. Samsung Refrigerator 24E (Defrost Heater Error)

Meaning: The defrost heater isn’t operating properly.
Solution: Inspect the heater and replace it if required.

Ice Maker Samsung Refrigerator Error Codes

11. Samsung Refrigerator 39E (Ice Maker Error)

Meaning: Ice maker operation failure.
Solution: Check for ice blockages and inspect the ice maker motor.

12. Samsung Refrigerator 40E (Ice Room Fan Error)

Meaning: Ice room fan isn’t functioning.
Solution: Clean or replace the fan.

13. Samsung Refrigerator 44E (Ice Maker Jammed)

Meaning: Ice maker is stuck or jammed.
Solution: Remove blockages and reset the ice maker.

14. Samsung Refrigerator 76C (Valve Error)

Meaning: Water valve malfunction detected.
Solution: Inspect and replace the water valve.

Power and Voltage Samsung Refrigerator Error Codes

15. Samsung Refrigerator PC CH (Power Communication Error)

Meaning: Communication issue between components.
Solution: Check for loose wiring and reset the refrigerator.

16. Samsung Refrigerator OF OF (Cooling Off Mode)

Meaning: Refrigerator is in demo mode.
Solution: Disable demo mode by pressing specific buttons as outlined in the manual.

17. Samsung Refrigerator 83E (Voltage Error)

Meaning: Voltage fluctuation detected.
Solution: Use a voltage stabilizer or check your home’s power supply.

18. Samsung Refrigerator 85E (Compressor Overload)

Meaning: The compressor is experiencing overload.
Solution: Inspect and service the compressor.

Water and Leakage Samsung Refrigerator Error Codes

19. Samsung Refrigerator LC (Leakage Error)

Meaning: Water leakage detected.
Solution: Check water lines and connections for leaks.

20. Samsung Refrigerator 25E (Drain Issue)

Meaning: The drain system is clogged or malfunctioning.
Solution: Clean the drain hose and ensure proper drainage.

21. Samsung Refrigerator 26E (Water Dispenser Error)

Meaning: Water dispenser isn’t working properly.
Solution: Check the dispenser motor and water line.

22. Samsung Refrigerator 23E (Condenser Fan Error)

Meaning: The condenser fan isn’t working.
Solution: Clean or replace the fan.

Advanced Samsung Refrigerator Error Codes

23. Samsung Refrigerator 88 99 (Main Control Board Error)

Meaning: There’s an issue with the main control board.
Solution: Inspect and replace the main control board if necessary.

24. Samsung Refrigerator 99E (Internal Sensor Issue)

Meaning: An internal sensor is malfunctioning.
Solution: Identify and replace the faulty sensor.

25. Samsung Refrigerator 86E (Overcurrent Error)

Meaning: High current detected in the refrigerator.
Solution: Check for electrical issues and reset the refrigerator.

26. Samsung Refrigerator 11E (Freezer Sensor Error)

Meaning: Freezer temperature sensor malfunction.
Solution: Replace the freezer sensor.

27. Samsung Refrigerator 12E (Refrigerator Sensor Error)

Meaning: Refrigerator temperature sensor malfunction.
Solution: Inspect and replace the sensor.

28. Samsung Refrigerator 21E (Refrigerator Fan Error)

Meaning: The refrigerator fan isn’t functioning properly.
Solution: Inspect and replace the fan motor.

Additional Samsung Refrigerator Error Codes

29. Samsung Refrigerator 53E (Inverter Compressor Error)

Meaning: Inverter compressor malfunction.
Solution: Inspect the compressor and inverter.

30. Samsung Refrigerator 88 CC (Temperature Sensor Error)

Meaning: A temperature sensor isn’t functioning.
Solution: Identify and replace the faulty sensor.

General Samsung Dishwasher Error Codes

1. Samsung Dishwasher LC (Leakage Error)

Meaning: The Samsung dishwasher detects a water leak.
Solution: Inspect the hoses, connections, and the bottom pan for water accumulation.

2. Samsung Dishwasher 4C (Water Supply Error)

Meaning: The Samsung dishwasher isn’t getting enough water.
Solution: Check water supply hoses, valves, and ensure proper water pressure.

3. Samsung Dishwasher HC (High-Temperature Error)

Meaning: The Samsung dishwasher detects overly high water temperature.
Solution: Ensure the water heater temperature is set to safe levels.

4. Samsung Dishwasher 5E (Drainage Error)

Meaning: The Samsung dishwasher isn’t draining properly.
Solution: Clear blockages in the drain hose or filter.

5. Samsung Dishwasher 7E (Water Wall Error)

Meaning: The water wall vane is stuck or not moving properly.
Solution: Ensure the vane is free to move and inspect the water wall motor.

6. Samsung Dishwasher bE2 (Button Error)

Meaning: A button on the Samsung dishwasher control panel is stuck.
Solution: Clean or replace the faulty button.

7. Samsung Dishwasher LE (Low Water Level)

Meaning: Insufficient water in the Samsung dishwasher during operation.
Solution: Check water supply hoses and connections.

8. Samsung Dishwasher OC (Overflow Error)

Meaning: The Samsung dishwasher detects an overflow condition.
Solution: Inspect the inlet valve and drainage system.

9. Samsung Dishwasher CE (Communication Error)

Meaning: Communication between the Samsung dishwasher’s components has failed.
Solution: Inspect wiring and the control board for issues.

10. Samsung Dishwasher PE (Power Error)

Meaning: Power supply issue detected in the Samsung dishwasher.
Solution: Check the power source and ensure a stable connection.

Water and Drainage Samsung Dishwasher Error Codes

11. Samsung Dishwasher AE (Aquastop Error)

Meaning: Water leakage is detected, triggering the aquastop function.
Solution: Inspect for leaks and reset the aquastop sensor.

12. Samsung Dishwasher HE (Heating Error)

Meaning: The heating element in the Samsung dishwasher isn’t working.
Solution: Test and replace the heating element if needed.

13. Samsung Dishwasher tE (Temperature Sensor Error)

Meaning: The temperature sensor isn’t functioning in the Samsung dishwasher.
Solution: Replace the faulty temperature sensor.

14. Samsung Dishwasher 3C (Pump Operation Error)

Meaning: The circulation pump in the Samsung dishwasher isn’t working.
Solution: Inspect and repair or replace the pump.

15. Samsung Dishwasher LE1 (Leak in Hose Area)

Meaning: Water leakage detected in the hose area of the Samsung dishwasher.
Solution: Check the hoses for cracks or loose connections.

Heating and Cooling Samsung Dishwasher Error Codes

16. Samsung Dishwasher HE1 (Overheating Error)

Meaning: The heating element in the Samsung dishwasher is overheating.
Solution: Replace the heating element if necessary.

17. Samsung Dishwasher HC1 (Heater Overload)

Meaning: Heater malfunction detected in the Samsung dishwasher.
Solution: Inspect and replace the heating unit.

18. Samsung Dishwasher tC (Thermistor Issue)

Meaning: Faulty thermistor readings in the Samsung dishwasher.
Solution: Replace the thermistor.

Door and Control Panel Samsung Dishwasher Error Codes

19. Samsung Dishwasher DE (Door Error)

Meaning: The Samsung dishwasher door isn’t closed properly.
Solution: Ensure the door latch is working and free of obstructions.

20. Samsung Dishwasher OE (Door Open Error)

Meaning: The Samsung dishwasher detects that the door is open.
Solution: Close the door securely and inspect the door sensor.

21. Samsung Dishwasher 1E (Water Level Sensor Error)

Meaning: Faulty water level sensor in the Samsung dishwasher.
Solution: Inspect and replace the sensor if needed.

22. Samsung Dishwasher SE (Sensor Error)

Meaning: General sensor error in the Samsung dishwasher.
Solution: Inspect and test all sensors for proper functionality.

Electrical and Advanced Samsung Dishwasher Error Codes

23. Samsung Dishwasher 9E (Low Voltage Error)

Meaning: The Samsung dishwasher detects low voltage.
Solution: Ensure a stable power supply to the dishwasher.

24. Samsung Dishwasher UC (Voltage Error)

Meaning: Incorrect voltage detected in the Samsung dishwasher.
Solution: Use a voltage stabilizer or contact an electrician.

25. Samsung Dishwasher AC (Control Unit Error)

Meaning: The Samsung dishwasher control unit is malfunctioning.
Solution: Reset the control unit or replace the control board.

26. Samsung Dishwasher BE (Button Error)

Meaning: A button is stuck on the Samsung dishwasher’s control panel.
Solution: Replace the control panel or clean the stuck button.

27. Samsung Dishwasher 6E (Water Valve Error)

Meaning: The Samsung dishwasher detects an issue with the water valve.
Solution: Inspect and replace the inlet valve if faulty.

28. Samsung Dishwasher E2 (Overcurrent Error)

Meaning: Overcurrent detected in the Samsung dishwasher motor.
Solution: Test and replace the motor if needed.

29. Samsung Dishwasher E3 (Overheating Protection)

Meaning: Overheating protection triggered in the Samsung dishwasher.
Solution: Ensure proper ventilation and inspect the heating system.

30. Samsung Dishwasher E4 (Overload Protection)

Meaning: Overload protection triggered in the Samsung dishwasher.
Solution: Reduce load and inspect components for wear.

General Samsung Oven Error Codes

1. Samsung Oven SE (Keypad Error)

Meaning: A key on the control panel is stuck.
Solution: Clean the control panel and ensure no buttons are jammed.

2. Samsung Oven E-08 (Communication Error)

Meaning: Communication between the control board and touch panel has failed.
Solution: Inspect and reconnect the wire harness or replace the faulty components.

3. Samsung Oven 4E (Temperature Sensor Error)

Meaning: The oven temperature sensor is faulty or disconnected.
Solution: Test and replace the sensor if necessary.

4. Samsung Oven C-d0 (Door Open Error)

Meaning: The oven door is not properly closed.
Solution: Check the door latch and ensure it's properly aligned.

5. Samsung Oven C-20 (Cooling Fan Error)

Meaning: The cooling fan isn’t operating correctly.
Solution: Inspect and replace the fan or its motor if required.

6. Samsung Oven E-27 (Door Lock Error)

Meaning: The oven door lock mechanism is malfunctioning.
Solution: Repair or replace the door lock assembly.

7. Samsung Oven E-32 (Temperature Adjustment Error)

Meaning: The oven temperature adjustment failed.
Solution: Reset the temperature and test for proper operation.

8. Samsung Oven C-F2 (Touch Sensor Error)

Meaning: A malfunction in the touch sensor panel.
Solution: Clean or replace the touch sensor panel.

9. Samsung Oven E-0A (Internal Memory Error)

Meaning: The oven’s main control board has a memory malfunction.
Solution: Reset the oven and replace the control board if the issue persists.

Temperature and Heating Samsung Oven Error Codes

10. Samsung Oven E-21 (Heating Error)

Meaning: The heating element or relay is faulty.
Solution: Test and replace the heating element or relay board.

11. Samsung Oven C-21 (Overheating)

Meaning: The oven has detected a high internal temperature.
Solution: Inspect the cooling fan and thermostat.

12. Samsung Oven E-08 (Temperature Sensor Open)

Meaning: The temperature sensor wire is open or disconnected.
Solution: Reconnect or replace the temperature sensor wiring.

13. Samsung Oven E-09 (Temperature Sensor Shorted)

Meaning: The temperature sensor wire is shorted.
Solution: Replace the temperature sensor.

14. Samsung Oven C-25 (Fan Cooling Error)

Meaning: The fan isn’t cooling the oven properly.
Solution: Check the fan motor and connections.

15. Samsung Oven HE (Heater Overheating)

Meaning: The heater is overheating.
Solution: Inspect the thermostat and heater assembly.

16. Samsung Oven E-24 (Convection Heater Error)

Meaning: The convection heater isn’t functioning.
Solution: Replace the convection heating element.

Door and Lock Samsung Oven Error Codes

17. Samsung Oven C-d1 (Door Not Locked)

Meaning: The oven door is not locking for self-cleaning mode.
Solution: Inspect the door lock mechanism and wiring.

18. Samsung Oven C-d2 (Door Locked Error)

Meaning: The door is locked and cannot be unlocked.
Solution: Reset the oven and test the lock assembly.

19. Samsung Oven E-11 (Door Sensor Error)

Meaning: Faulty door sensor.
Solution: Replace the door sensor or latch assembly.

Electrical and Control Samsung Oven Error Codes

20. Samsung Oven E-28 (Control Board Overload)

Meaning: The control board is overloaded or malfunctioning.
Solution: Reset the oven or replace the control board.

21. Samsung Oven E-83 (Power Supply Error)

Meaning: Voltage supplied to the oven is inconsistent.
Solution: Check the power supply and stabilize the voltage.

22. Samsung Oven E-84 (Relay Board Error)

Meaning: The relay board is malfunctioning.
Solution: Replace the relay board.

23. Samsung Oven E-88 (Control Panel Communication Error)

Meaning: Communication between the touchpad and control board has failed.
Solution: Inspect and reconnect wire harnesses or replace the faulty component.

24. Samsung Oven E-96 (Circuit Overload)

Meaning: Overloaded circuit in the oven's electrical system.
Solution: Test the wiring and control board for damage.

Advanced Samsung Oven Error Codes

25. Samsung Oven E-01 (System Overload)

Meaning: System overload detected in the oven’s circuitry.
Solution: Reset the oven and replace the main control board if needed.

26. Samsung Oven C-30 (Cooling Error)

Meaning: The oven cooling system is malfunctioning.
Solution: Inspect the cooling fan and its connections.

27. Samsung Oven E-15 (Touchpad Error)

Meaning: Touchpad is unresponsive.
Solution: Clean or replace the touchpad.

28. Samsung Oven E-03 (Fan Motor Error)

Meaning: The fan motor isn’t operating correctly.
Solution: Replace the fan motor or its wiring.

29. Samsung Oven E-05 (Sensor Calibration Error)

Meaning: The temperature sensor requires calibration.
Solution: Calibrate the sensor or replace it.

30. Samsung Oven E-99 (Memory Corruption)

Meaning: Internal memory failure on the main control board.
Solution: Reset or replace the control board.

General Samsung Double Oven Error Codes

1. Samsung Oven SE (Keypad Error)

Meaning: The control panel buttons are stuck or unresponsive.
Solution: Inspect the control panel for stuck buttons and clean it. If the issue persists, replace the control panel.

2. Samsung Oven C-d0 (Door Open Error)

Meaning: The door is not properly closed or latched.
Solution: Check the door latch and hinges for damage or misalignment. Ensure the door closes securely.

3. Samsung Oven E-08 (Temperature Sensor Error)

Meaning: The oven temperature sensor is faulty or not reading correctly.
Solution: Inspect the temperature sensor and replace it if necessary.

4. Samsung Oven F-02 (Heating Element Error)

Meaning: The heating element is not functioning properly.
Solution: Check for damage to the heating element and replace it if faulty.

5. Samsung Oven F-04 (Communication Error)

Meaning: There is a communication issue between the control board and the oven.
Solution: Inspect the wiring connections between the control board and components. Replace damaged wiring.

6. Samsung Oven dE (Door Lock Error)

Meaning: The door lock mechanism isn’t functioning during the self-cleaning cycle.
Solution: Test the door lock motor and switch, and replace them if defective.

Temperature and Heating Samsung Double Oven Error Codes

7. Samsung Oven tE (Temperature Error)

Meaning: The temperature inside the oven is not being regulated correctly.
Solution: Check the temperature sensor and control board for proper operation.

8. Samsung Oven HE (Heating Error)

Meaning: A heating element is malfunctioning.
Solution: Inspect the bake or broil elements for continuity and replace them if needed.

9. Samsung Oven F-03 (Overheating Error)

Meaning: The oven has detected an overheating condition.
Solution: Ensure proper ventilation around the oven. Inspect the cooling fan and temperature sensor.

10. Samsung Oven F-06 (Cooling Fan Error)

Meaning: The cooling fan is not operating correctly.
Solution: Check for blockages, test the cooling fan motor, and replace it if faulty.

11. Samsung Oven E-27 (Convection Fan Error)

Meaning: The convection fan isn’t working properly.
Solution: Inspect the fan motor and wiring for issues. Replace the motor if necessary.

Door and Lock Samsung Double Oven Error Codes

12. Samsung Oven dC (Door Not Closing)

Meaning: The oven door is not closing securely.
Solution: Inspect the hinges and gasket for obstructions or damage.

13. Samsung Oven C-21 (Locked Door Error)

Meaning: The door remains locked after a cleaning cycle.
Solution: Reset the oven and test the lock mechanism. Replace it if necessary.

14. Samsung Oven E-83 (Door Open During Operation)

Meaning: The oven door was opened while the oven was in use.
Solution: Close the door firmly and ensure the latch is secure.

Electrical and Control Samsung Double Oven Error Codes

15. Samsung Oven E-32 (Control Panel Error)

Meaning: The main control panel has encountered an issue.
Solution: Inspect the control panel connections and replace the panel if required.

16. Samsung Oven F-31 (Voltage Error)

Meaning: Incorrect voltage detected in the oven’s power supply.
Solution: Ensure the power supply meets the oven’s voltage requirements.

17. Samsung Oven E-40 (Sensor Failure)

Meaning: A sensor within the oven has failed.
Solution: Identify the faulty sensor and replace it.

18. Samsung Oven E-60 (Main Control Board Error)

Meaning: The main control board is malfunctioning.
Solution: Replace the main control board if troubleshooting doesn’t resolve the error.

Advanced Samsung Double Oven Error Codes

19. Samsung Oven E-85 (Relay Board Error)

Meaning: There is an issue with the relay board.
Solution: Inspect and replace the relay board as needed.

20. Samsung Oven E-21 (Steam Error)

Meaning: A steam system error is detected (if applicable).
Solution: Inspect the steam generator and connections for issues.

21. Samsung Oven C-d1 (Sensor Communication Error)

Meaning: Communication between the sensor and the control board is disrupted.
Solution: Check the wiring and connections between the sensor and the control board.

22. Samsung Oven E-91 (Software Error)

Meaning: A software or firmware issue is detected.
Solution: Reset the oven or consult Samsung support for a software update.

23. Samsung Oven F-11 (Control Circuit Overload)

Meaning: An overload condition in the control circuit.
Solution: Replace the affected control board or components.

General Samsung Microwave Error Codes

1. Samsung Microwave SE (Keypad Error)

Meaning: The control panel or keypad is malfunctioning.
Solution: Clean the keypad or replace it if necessary.

2. Samsung Microwave 5E (Sensor Error)

Meaning: The humidity or temperature sensor isn’t working correctly.
Solution: Inspect and replace the faulty sensor.

3. Samsung Microwave E-11 (Humidity Sensor Error)

Meaning: The humidity sensor is not functioning properly.
Solution: Check the sensor and replace it if required.

4. Samsung Microwave E-12 (High Temperature Error)

Meaning: The microwave has detected an unusually high temperature.
Solution: Let the microwave cool and check the ventilation.

5. Samsung Microwave dE (Door Error)

Meaning: The microwave door isn’t closed properly.
Solution: Ensure the door is securely closed and check the door switches.

6. Samsung Microwave 4E (Ventilation Error)

Meaning: The ventilation system isn’t functioning correctly.
Solution: Inspect the fan and ventilation pathways.

7. Samsung Microwave C-F2 (Communication Error)

Meaning: There’s a communication issue between the control board and the sensor.
Solution: Reset the microwave or replace the faulty parts.

8. Samsung Microwave H-97 (High Voltage Error)

Meaning: A high voltage component, such as the magnetron or inverter, is malfunctioning.
Solution: Inspect and replace the magnetron or inverter circuit.

9. Samsung Microwave E-13 (Overheating Protection)

Meaning: The microwave has overheated and triggered its safety mechanism.
Solution: Allow the microwave to cool down and check ventilation.

10. Samsung Microwave E-24 (Turntable Motor Error)

Meaning: The turntable motor is not functioning properly.
Solution: Test and replace the motor if necessary.

Heating and Cooking Error Codes

11. Samsung Microwave E-83 (Cooking Function Error)

Meaning: There’s an issue with the cooking function.
Solution: Reset the microwave and test the cooking modes.

12. Samsung Microwave E-32 (Weight Sensor Error)

Meaning: The weight sensor isn’t functioning.
Solution: Inspect and replace the sensor if needed.

13. Samsung Microwave H-98 (Magnetron Error)

Meaning: The magnetron is not generating heat.
Solution: Replace the magnetron.

14. Samsung Microwave E-15 (Grill Heater Error)

Meaning: The grill heater isn’t functioning correctly.
Solution: Inspect and replace the heater element.

15. Samsung Microwave E-25 (Convection Fan Error)

Meaning: The convection fan isn’t working.
Solution: Test the fan motor and replace it if faulty.

16. Samsung Microwave E-5 (Sensor Calibration Error)

Meaning: The sensor calibration is incorrect.
Solution: Recalibrate the sensor or replace it.

17. Samsung Microwave C-21 (Steam Sensor Error)

Meaning: The steam sensor isn’t functioning properly.
Solution: Test and replace the steam sensor.

Power and Electrical Error Codes

18. Samsung Microwave 8888 or 88:88 (Display Error)

Meaning: A power surge or electrical issue has occurred.
Solution: Reset the microwave or check the power source.

19. Samsung Microwave H-95 (Inverter Error)

Meaning: The inverter circuit is malfunctioning.
Solution: Replace the inverter circuit.

20. Samsung Microwave F-61 (Fuse Error)

Meaning: A fuse inside the microwave has blown.
Solution: Replace the blown fuse with the correct type.

21. Samsung Microwave C-10 (Main Control Board Error)

Meaning: The main control board isn’t functioning.
Solution: Replace the control board.

22. Samsung Microwave E-04 (Voltage Error)

Meaning: The microwave is receiving an incorrect voltage.
Solution: Use a voltage stabilizer or inspect the power supply.

Door and Safety Error Codes

23. Samsung Microwave C-20 (Door Switch Error)

Meaning: The door switch is malfunctioning.
Solution: Inspect and replace the faulty switch.

24. Samsung Microwave dE1 (Door Lock Error)

Meaning: The microwave door lock isn’t working properly.
Solution: Test the door lock mechanism and replace it if needed.

25. Samsung Microwave E-9 (Safety Circuit Error)

Meaning: The safety circuit has been triggered.
Solution: Reset the microwave or replace the safety components.

Advanced Samsung Microwave Error Codes

26. Samsung Microwave H-94 (High Voltage Transformer Error)

Meaning: The high-voltage transformer isn’t functioning.
Solution: Replace the transformer.

27. Samsung Microwave C-F4 (Communication Error with Inverter)

Meaning: There’s a communication issue with the inverter circuit.
Solution: Reset the microwave or replace the inverter.

28. Samsung Microwave E-31 (Steam Sensor Short Circuit)

Meaning: The steam sensor has short-circuited.
Solution: Replace the steam sensor.

29. Samsung Microwave C-03 (Temperature Sensor Error)

Meaning: The temperature sensor isn’t working.
Solution: Inspect and replace the temperature sensor.

30. Samsung Microwave E-27 (Convection Heater Error)

Meaning: The convection heater isn’t functioning.
Solution: Replace the convection heater.

General LG Refrigerator Error Codes

1. LG Refrigerator ER IF (Ice Fan Error)

Meaning: Ice fan malfunction detected.
Solution: Check for ice buildup or obstruction in the ice fan area and clear it.

2. LG Refrigerator ER FF (Freezer Fan Error)

Meaning: Freezer fan isn’t working properly.
Solution: Inspect and clean the fan or replace it if damaged.

3. LG Refrigerator ER FS (Freezer Sensor Error)

Meaning: Faulty freezer temperature sensor.
Solution: Test the freezer sensor and replace it if needed.

4. LG Refrigerator ER RS (Refrigerator Sensor Error)

Meaning: Refrigerator temperature sensor isn’t working.
Solution: Check for disconnections or replace the sensor.

5. LG Refrigerator ER DS (Defrost Sensor Error)

Meaning: Defrosting sensor is malfunctioning.
Solution: Replace the defrost sensor.

6. LG Refrigerator ER DH (Defrost Heater Error)

Meaning: The defrost heater isn’t working correctly.
Solution: Inspect the defrost heater and replace it if necessary.

7. LG Refrigerator ER CO (Communication Error)

Meaning: Communication failure between the control board and display.
Solution: Inspect wiring connections and control board for faults.

8. LG Refrigerator ER dH (Defrost Error)

Meaning: Defrost cycle not completed within the set time.
Solution: Inspect the defrost system for issues.

Cooling System LG Refrigerator Error Codes

9. LG Refrigerator ER rD (Refrigerator Door Error)

Meaning: Refrigerator door isn’t closing properly.
Solution: Check the door seal and hinges for damage or obstructions.

10. LG Refrigerator ER 67 (Door Switch Error)

Meaning: Faulty door switch detected.
Solution: Inspect and replace the door switch if faulty.

11. LG Refrigerator ER F1 (Freezer Evaporator Fan Error)

Meaning: Freezer evaporator fan malfunction.
Solution: Test the fan and replace it if necessary.

12. LG Refrigerator ER CF (Condenser Fan Error)

Meaning: Condenser fan isn’t working properly.
Solution: Clean or replace the fan as needed.

13. LG Refrigerator ER RT (Room Temperature Sensor Error)

Meaning: Room temperature sensor fault detected.
Solution: Inspect and replace the sensor if required.

14. LG Refrigerator ER PC (Power Error)

Meaning: Power supply issue detected.
Solution: Ensure stable power supply or use a voltage stabilizer.

Ice Maker LG Refrigerator Error Codes

15. LG Refrigerator ER IS (Ice Maker Sensor Error)

Meaning: Ice maker sensor isn’t functioning.
Solution: Replace the ice maker sensor.

16. LG Refrigerator ER It (Ice Tray Motor Error)

Meaning: Ice tray motor malfunction detected.
Solution: Inspect the ice tray motor and replace it if necessary.

17. LG Refrigerator ER IF (Ice Fan Motor Error)

Meaning: Ice fan motor isn’t operating.
Solution: Clear any ice blockages and test the motor.

18. LG Refrigerator ER FdS (Ice Maker Fill Sensor Error)

Meaning: The ice maker fill sensor isn’t working correctly.
Solution: Check the water supply line and replace the sensor if needed.

Temperature and Compressor LG Refrigerator Error Codes

19. LG Refrigerator ER GC (Compressor Error)

Meaning: Compressor isn’t working properly.
Solution: Check the compressor and replace it if faulty.

20. LG Refrigerator ER TC (Thermistor Error)

Meaning: Faulty thermistor detected.
Solution: Inspect and replace the thermistor.

21. LG Refrigerator ER AC (Ambient Temperature Sensor Error)

Meaning: Ambient temperature sensor isn’t working.
Solution: Replace the ambient temperature sensor.

22. LG Refrigerator ER 22 (Compressor Relay Error)

Meaning: The compressor relay isn’t functioning.
Solution: Replace the relay or control board if needed.

23. LG Refrigerator ER Lo (Low Temperature Error)

Meaning: Refrigerator compartment is too cold.
Solution: Adjust the temperature settings or inspect the thermostat.

24. LG Refrigerator ER HI (High Temperature Error)

Meaning: Refrigerator compartment is too warm.
Solution: Check the cooling system and airflow.

Defrost and System Sensor LG Refrigerator Error Codes

25. LG Refrigerator ER DF (Defrost Malfunction)

Meaning: Defrost system failure detected.
Solution: Test the defrost system and replace faulty components.

26. LG Refrigerator ER HS (Humidity Sensor Error)

Meaning: Humidity sensor isn’t functioning.
Solution: Replace the humidity sensor if needed.

27. LG Refrigerator ER EL (Evaporator Loop Sensor Error)

Meaning: Evaporator loop sensor isn’t working properly.
Solution: Replace the evaporator loop sensor.

28. LG Refrigerator ER 88 (Control Panel Display Error)

Meaning: Faulty display or connection issue.
Solution: Test and repair the control panel.

LG WASHER

OE (LG washer Drain Error)
Meaning: Water drainage issue detected.

IE (LG washer Water Inlet Error)
Meaning: Insufficient water supply or water not entering the washer properly.
UE (LG washer Unbalanced Load Error)
Meaning: Washer drum unable to balance the load during spinning.
CL (LG washer Child Lock Activated)
Meaning: Control panel locked due to activated child lock.
FE (LG washer Overflow Error)
Meaning: Washer detected excessive water filling.
LE (LG washer Locked Motor Error)
Meaning: Motor experiencing lock or excessive resistance.
DE (LG washer Door Error)
Meaning: Door not closed or not detected as locked.
tE (LG washer Thermistor Error)
Meaning: Fault in the temperature sensor.
CE (LG washer Overcurrent Error)
Meaning: Electrical overload in the motor detected.
PE (LG washer Pressure Sensor Error)
Meaning: Malfunction in water level pressure sensor.
HE (LG washer Heater Error)
Meaning: Fault in the water heater system.
SE (LG washer Sensor Error)
Meaning: Motor position sensor malfunction detected.
PF (LG washer Power Failure)
Meaning: Power supply to the washer interrupted.
dE1 (LG washer Door Switch Error)
Meaning: Issue with door switch or sensor.
E1 (LG washer Leakage Error)
Meaning: Internal water leakage or overflow detected.
AE (LG washer Water Leak Alarm)
Meaning: Washer detected potential water leakage.
1E (LG washer Inlet Valve Error)
Meaning: Obstruction or failure in the water inlet valve.
Sud or Sd (LG washer Excessive Suds Error)
Meaning: Too much detergent or excessive suds detected.
Lg (LG washer Software Communication Error)
Meaning: Issue in communication between washer’s control components.
EE (LG washer EEPROM Error)
Meaning: Programming issue or fault in the washer’s control board.

LG Dryer Error Codes

D80 Error Code (LG dryer Flow Sense Duct Blockage 80%)
Meaning: LG dryer detects restricted airflow; 80% blockage in exhaust vent, lint buildup, or vent pipe obstruction.
D90 Error Code (LG dryer Flow Sense Duct Blockage 90%)
Meaning: LG dryer airflow restriction severe; 90% vent blockage, exhaust duct clogged, lint trap issue.
D95 Error Code (LG dryer Flow Sense Duct Blockage 95%)
Meaning: LG dryer reports critical airflow restriction; 95% blockage in ventilation, clogged lint filter or vent system.
tE1 Error Code (LG dryer Thermistor Error 1)
Meaning: LG dryer temperature sensor error; thermistor malfunction, heating element temperature regulation problem.
tE2 Error Code (LG dryer Thermistor Error 2)
Meaning: Temperature sensor issue in LG dryer; thermistor circuit fault or heat control error.
HS Error Code (LG dryer Humidity Sensor Error)
Meaning: LG dryer humidity sensor malfunction; drying cycle disruption, moisture detection failure.
PF Error Code (LG dryer Power Failure)
Meaning: Power interruption detected by LG dryer; voltage instability, electrical supply problem.
LE Error Code (LG dryer Locked Motor Error)
Meaning: LG dryer motor lock detected; drum rotation failure, motor overload, belt or bearing issue.
nP Error Code (LG dryer No Power Error)
Meaning: LG dryer power supply issue; improper voltage, wiring problem, power source failure.
dE Error Code (LG dryer Door Error)
Meaning: LG dryer door not closed properly; latch problem, door switch failure, door alignment issue.
CL Error Code (LG dryer Child Lock Activated)
Meaning: LG dryer control panel locked; child safety feature engaged, buttons disabled.
E13 Error Code (LG dryer Drain Pump Error)
Meaning: LG ventless dryer water drain pump malfunction; water not draining, pump blockage.
FO Error Code (LG dryer Filter Out Error)
Meaning: LG dryer lint filter missing or not installed correctly; lint trap warning, airflow restriction.
PS Error Code (LG dryer Power Supply Error)
Meaning: LG dryer incorrect power supply; voltage mismatch, electrical circuit problem, power cord issue.
AE Error Code (LG dryer Communication Error)
Meaning: LG dryer control board communication failure; PCB fault, wiring harness issue, system error.
HE Error Code (LG dryer Heating Error)
Meaning: LG dryer heating system failure; heating element, thermal fuse, or thermostat malfunction.
GAS Error Code (LG dryer Gas Supply Error)
Meaning: LG gas dryer ignition failure; insufficient gas supply, gas valve problem, burner issue.
OE Error Code (LG dryer Overflow Error)
Meaning: LG ventless dryer water overflow detected; drain system failure, excess condensation.
E5 Error Code (LG dryer Temperature Sensor Error)
Meaning: LG dryer temperature sensor fault; heat regulation issue, sensor wiring problem, overheating risk.
BE Error Code (LG dryer Button Error)
Meaning: LG dryer button stuck or unresponsive; control panel fault, keypad error, physical button damage.

LG Dishwasher Error Codes

OE Error Code (LG dishwasher Drainage Error)
Meaning: LG dishwasher detects a drainage issue; water not draining, clogged drain hose, or pump obstruction.
IE Error Code (LG dishwasher Inlet Error)
Meaning: LG dishwasher water supply problem; insufficient water entering, low pressure, or inlet valve malfunction.
LE Error Code (LG dishwasher Motor Error)
Meaning: LG dishwasher motor locked; pump motor overload, foreign object obstruction, or wiring issue.
HE Error Code (LG dishwasher Heating Error)
Meaning: LG dishwasher heating system failure; water heater, heating element, or thermostat malfunction.
FE Error Code (LG dishwasher Fill Error)
Meaning: LG dishwasher overfilling detected; water inlet valve stuck open, faulty pressure switch, or sensor error.
CL Error Code (LG dishwasher Child Lock Activated)
Meaning: LG dishwasher control panel locked; child safety feature enabled, button operation disabled.
AE Error Code (LG dishwasher Leakage Error)
Meaning: LG dishwasher water leakage detected; internal leak, overflow, or cracked hose.
tE Error Code (LG dishwasher Thermistor Error)
Meaning: LG dishwasher thermistor fault; temperature sensor malfunction, improper water heating.
E1 Error Code (LG dishwasher Water Leak Error)
Meaning: LG dishwasher water leakage detected; possible hose damage or improper installation.
nE Error Code (LG dishwasher Vario Motor Error)
Meaning: LG dishwasher vario motor issue; spray arm or motor malfunction.
PE Error Code (LG dishwasher Pressure Switch Error)
Meaning: LG dishwasher pressure sensor fault; water level monitoring issue or sensor wiring error.
dE Error Code (LG dishwasher Door Error)
Meaning: LG dishwasher door not closed properly; latch misalignment or faulty door switch.
PF Error Code (LG dishwasher Power Failure)
Meaning: LG dishwasher power interruption detected; electrical outage, unstable voltage supply.
HE1 Error Code (LG dishwasher Heater Relay Error)
Meaning: LG dishwasher heating relay malfunction; relay switch issue or control board failure.
F3 Error Code (LG dishwasher Drain Pump Error)
Meaning: LG dishwasher drain pump issue; water not draining due to pump failure or clog.
H1 Error Code (LG dishwasher Heater Error)
Meaning: LG dishwasher heater not functioning; damaged heating element or thermal fuse.
LE1 Error Code (LG dishwasher Leakage Sensor Error)
Meaning: LG dishwasher water leakage sensor malfunction; false leak detection or faulty sensor wiring.
B1 Error Code (LG dishwasher Button Error)
Meaning: LG dishwasher button stuck or keypad malfunction; control panel error or physical damage.
CE Error Code (LG dishwasher Current Error)
Meaning: LG dishwasher overcurrent detected; electrical fault or motor overload.
F1 Error Code (LG dishwasher Flow Meter Error)
Meaning: LG dishwasher flow meter problem; improper water flow measurement, sensor failure, or blockage.

LG Oven Error Codes

F1 Error Code (LG oven Temperature Sensor Error)
Meaning: LG oven temperature sensor malfunction; faulty sensor, wiring issue, or inaccurate temperature readings.
F2 Error Code (LG oven Overheating Error)
Meaning: LG oven detected overheating; runaway temperature, faulty thermostat, or control board issue.
F3 Error Code (LG oven Open Temperature Sensor)
Meaning: LG oven temperature sensor circuit open; sensor disconnected or wiring problem.
F4 Error Code (LG oven Shorted Temperature Sensor)
Meaning: LG oven temperature sensor circuit shorted; faulty sensor, damaged wiring, or control board issue.
F5 Error Code (LG oven Relay Stuck Error)
Meaning: LG oven relay switch stuck; faulty relay board or control board malfunction.
F6 Error Code (LG oven Door Lock Error)
Meaning: LG oven door lock malfunction; faulty lock mechanism, switch, or wiring issue.
F7 Error Code (LG oven Touch Panel Error)
Meaning: LG oven control touchpad or keypad stuck; button failure or control panel malfunction.
F9 Error Code (LG oven Oven Door Open Error)
Meaning: LG oven detected open door during self-clean cycle; door latch or sensor issue.
PF Error Code (LG oven Power Failure)
Meaning: LG oven power supply interrupted; electrical outage or unstable voltage supply.
HE Error Code (LG oven Heating Element Error)
Meaning: LG oven heating element failure; bake or broil element not functioning, wiring issue.
E1 Error Code (LG oven Communication Error)
Meaning: LG oven control board communication failure; mainboard or relay board issue.
dO Error Code (LG oven Door Open Error)
Meaning: LG oven door detected as open; door latch misalignment or faulty door switch.
LOC Error Code (LG oven Control Lock Activated)
Meaning: LG oven control panel locked; child lock feature engaged.
tC Error Code (LG oven Thermal Cut-Off Triggered)
Meaning: LG oven thermal cutoff activated; overheating or damaged thermal fuse.
Err Error Code (LG oven General Error)
Meaning: LG oven system detected an unspecified error; control board or sensor fault.
Sb Error Code (LG oven Sabbath Mode Activated)
Meaning: LG oven in Sabbath mode; delayed operations or limited functionality enabled.
F10 Error Code (LG oven Cooling Fan Error)
Meaning: LG oven cooling fan not operating; fan motor, sensor, or wiring malfunction.
Ad Error Code (LG oven Auto Door Error)
Meaning: LG oven automatic door lock system failure; motor or sensor issue.
SE Error Code (LG oven Sensor Error)
Meaning: LG oven detected sensor malfunction; temperature, touchpad, or relay sensor issue.
C-dO Error Code (LG oven Self-Clean Door Error)
Meaning: LG oven detected an issue with the door during self-clean cycle; door lock system or latch fault.

Whirlpool Refrigerator Error Codes

E1 Error Code (Whirlpool refrigerator Thermistor Error)
Meaning: Whirlpool refrigerator thermistor malfunction; temperature sensor fault, disconnected, or damaged.
E2 Error Code (Whirlpool refrigerator Evaporator Fan Error)
Meaning: Evaporator fan motor malfunction; fan not spinning, wiring fault, or motor failure.
E3 Error Code (Whirlpool refrigerator Defrost Sensor Error)
Meaning: Whirlpool refrigerator defrost sensor issue; faulty defrost thermostat or sensor wiring problem.
E4 Error Code (Whirlpool refrigerator Defrost Heater Error)
Meaning: Defrost heater malfunction; failure to heat during defrost cycle, or wiring issue.
E5 Error Code (Whirlpool refrigerator Control Board Error)
Meaning: Whirlpool refrigerator main control board communication failure; software or hardware fault.
E6 Error Code (Whirlpool refrigerator Ice Maker Error)
Meaning: Ice maker malfunction; water supply problem, jammed ice tray, or faulty motor.
E7 Error Code (Whirlpool refrigerator Damper Control Error)
Meaning: Damper control malfunction; air damper stuck open or closed, affecting airflow regulation.
E8 Error Code (Whirlpool refrigerator Condenser Fan Error)
Meaning: Condenser fan motor not operating; fan motor failure, debris blockage, or electrical fault.
E9 Error Code (Whirlpool refrigerator Water Inlet Valve Error)
Meaning: Whirlpool refrigerator water inlet valve failure; water flow restricted, clogged, or valve not opening.
E10 Error Code (Whirlpool refrigerator High Temperature Error)
Meaning: Internal temperature too high; cooling issue, dirty condenser coil, or refrigerant problem.
E11 Error Code (Whirlpool refrigerator Door Open Error)
Meaning: Door detected as open; faulty door switch, misaligned gasket, or door not closing properly.
E12 Error Code (Whirlpool refrigerator Compressor Error)
Meaning: Compressor malfunction; motor failure, relay fault, or refrigerant system issue.
E13 Error Code (Whirlpool refrigerator Defrost Circuit Error)
Meaning: Whirlpool refrigerator defrost circuit fault; heater, thermostat, or timer issue.
E14 Error Code (Whirlpool refrigerator Temperature Sensor Error)
Meaning: Temperature sensor reading incorrect; sensor failure or communication problem with the control board.
E15 Error Code (Whirlpool refrigerator Ice Dispenser Error)
Meaning: Ice dispenser motor stuck; blockage, motor fault, or dispenser control error.
E16 Error Code (Whirlpool refrigerator Freezer Fan Error)
Meaning: Whirlpool refrigerator freezer fan not functioning; motor failure or wiring issue.
E17 Error Code (Whirlpool refrigerator Water Filter Error)
Meaning: Whirlpool refrigerator detects water filter issue; clogged or improperly installed filter.
E18 Error Code (Whirlpool refrigerator Overload Error)
Meaning: Electrical overload in refrigerator system; compressor or power supply issue.
E19 Error Code (Whirlpool refrigerator Energy Efficiency Error)
Meaning: Whirlpool refrigerator running inefficiently; cooling system or insulation problem.
E20 Error Code (Whirlpool refrigerator Communication Error)
Meaning: Whirlpool refrigerator control board communication failure; wiring harness or PCB fault.

Whirlpool Washer Error Codes

F0 E1 Error Code (Whirlpool washer Load Sensing Error)
Meaning: Whirlpool washer detects a load sensing issue; improper load balance, load size sensor fault.
F1 E1 Error Code (Whirlpool washer Main Control Error)
Meaning: Control board malfunction; software issue, PCB hardware fault, or power supply problem.
F1 E2 Error Code (Whirlpool washer Motor Control Error)
Meaning: Whirlpool washer motor control fault; wiring issue, motor overload, or communication error.
F2 E3 Error Code (Whirlpool washer Keypad/Control Lock Error)
Meaning: Touchpad stuck or unresponsive; keypad failure, child lock activated, or wiring fault.
F3 E1 Error Code (Whirlpool washer Water Temperature Sensor Error)
Meaning: Temperature sensor failure; faulty thermistor, wiring issue, or incorrect temperature readings.
F5 E2 Error Code (Whirlpool washer Door Lock Error)
Meaning: Door not locking or unlocking; latch mechanism fault, misalignment, or wiring problem.
F5 E3 Error Code (Whirlpool washer Door Not Closed)
Meaning: Whirlpool washer door not properly closed; door switch or alignment issue.
F6 E1 Error Code (Whirlpool washer Communication Error)
Meaning: Whirlpool washer communication failure between main control and motor control boards.
F8 E1 Error Code (Whirlpool washer No Water Detected)
Meaning: Washer not filling with water; inlet valve issue, water pressure problem, or supply hose blockage.
F8 E2 Error Code (Whirlpool washer Dispenser System Error)
Meaning: Detergent or softener dispenser malfunction; clogged dispenser tray or control board fault.
F9 E1 Error Code (Whirlpool washer Drain Pump Error)
Meaning: Whirlpool washer drainage issue; clogged drain hose, pump failure, or obstruction in the system.
F7 E1 Error Code (Whirlpool washer Motor Speed Error)
Meaning: Motor unable to reach the required speed; motor drive fault, belt issue, or wiring problem.
F2 E1 Error Code (Whirlpool washer Stuck Button Error)
Meaning: Control panel button stuck; physical button damage or control board fault.
F3 E2 Error Code (Whirlpool washer Pressure Sensor Error)
Meaning: Whirlpool washer pressure sensor malfunction; incorrect water level readings or wiring issue.
F6 E3 Error Code (Whirlpool washer Drive System Error)
Meaning: Drive system failure; motor, belt, or control board communication fault.
F8 E3 Error Code (Whirlpool washer Overflow Detected)
Meaning: Washer detected water overflow; faulty inlet valve, pressure switch, or drainage issue.
F9 E2 Error Code (Whirlpool washer Long Drain Time)
Meaning: Whirlpool washer taking too long to drain; clogged pump, slow water flow, or blockage.
F5 E1 Error Code (Whirlpool washer Lid Switch Error)
Meaning: Lid switch not operating properly; misalignment, wiring issue, or switch failure.
F7 E5 Error Code (Whirlpool washer Shifter Actuator Error)
Meaning: Whirlpool washer shift actuator malfunction; mechanical or wiring fault in the actuator system.
F8 E0 Error Code (Whirlpool washer Low Water Flow)
Meaning: Low water flow detected; clogged inlet filters, water supply issue, or faulty water valve.

Whirlpool Dryer Error Codes

F0 E1 Error Code (Whirlpool dryer Primary Control Error)
Meaning: Whirlpool dryer main control board failure; communication error or hardware fault in the PCB.
F1 E1 Error Code (Whirlpool dryer Control Board Error)
Meaning: Main control board malfunction; software issue or control panel wiring problem.
F2 E3 Error Code (Whirlpool dryer Keypad Error)
Meaning: Keypad or button malfunction; stuck button, touchpad fault, or wiring issue.
F3 E1 Error Code (Whirlpool dryer Thermistor Open)
Meaning: Whirlpool dryer temperature sensor (thermistor) circuit open; faulty thermistor or broken wiring.
F3 E2 Error Code (Whirlpool dryer Thermistor Short)
Meaning: Temperature sensor circuit shorted; thermistor failure or wiring problem.
F4 E1 Error Code (Whirlpool dryer Heater Relay Stuck)
Meaning: Whirlpool dryer heating relay stuck; heating element remains on or does not function.
F4 E3 Error Code (Whirlpool dryer Heating System Error)
Meaning: Heating element failure; thermal fuse blown, thermostat fault, or wiring issue.
F5 E1 Error Code (Whirlpool dryer Door Switch Error)
Meaning: Door switch not functioning; door not detected as closed or switch wiring problem.
F6 E1 Error Code (Whirlpool dryer Communication Error)
Meaning: Communication failure between control board and motor; wiring issue or PCB fault.
F7 E1 Error Code (Whirlpool dryer Moisture Sensor Error)
Meaning: Whirlpool dryer moisture sensor malfunction; sensor failure or wiring problem.
F8 E1 Error Code (Whirlpool dryer Low Airflow)
Meaning: Restricted airflow detected; lint filter clogged, exhaust duct blockage, or blower motor issue.
F9 E1 Error Code (Whirlpool dryer Long Drying Time)
Meaning: Whirlpool dryer taking too long to dry clothes; vent obstruction, heating issue, or sensor fault.
AF Error Code (Whirlpool dryer Airflow Restricted)
Meaning: Airflow in dryer vent restricted; lint buildup, exhaust blockage, or vent pipe issue.
PF Error Code (Whirlpool dryer Power Failure)
Meaning: Whirlpool dryer power supply interrupted; voltage instability or power outage.
L2 Error Code (Whirlpool dryer Low Voltage)
Meaning: Insufficient voltage detected; electrical supply problem, power cord, or outlet issue.
E1 Error Code (Whirlpool dryer Thermal Fuse Blown)
Meaning: Whirlpool dryer detected overheating; thermal fuse failure or blocked vent system.
E2 Error Code (Whirlpool dryer Drum Motor Error)
Meaning: Dryer drum motor not functioning; motor failure, belt issue, or wiring problem.
E3 Error Code (Whirlpool dryer Control Panel Error)
Meaning: Whirlpool dryer control panel malfunction; keypad or display issue.
F1 E2 Error Code (Whirlpool dryer Blower Motor Error)
Meaning: Dryer blower motor not operating; motor jammed, wiring fault, or relay issue.
LOC Error Code (Whirlpool dryer Control Lock Activated)
Meaning: Whirlpool dryer control panel locked; child lock feature enabled, buttons disabled.

Whirlpool Dishwasher Error Codes

F1 Error Code (Whirlpool dishwasher Flood Switch Error)
Meaning: Whirlpool dishwasher detects flooding; water accumulation in the base, faulty flood switch, or leakage issue.
F2 Error Code (Whirlpool dishwasher Heating Error)
Meaning: Whirlpool dishwasher heating problem; malfunctioning heating element, faulty thermostat, or wiring issue.
F3 Error Code (Whirlpool dishwasher Water Temperature Sensor Error)
Meaning: Temperature sensor malfunction; incorrect water heating, sensor fault, or wiring issue.
F4 Error Code (Whirlpool dishwasher Door Switch Error)
Meaning: Whirlpool dishwasher door switch issue; door not properly closed or switch failure.
F5 Error Code (Whirlpool dishwasher Overflow Error)
Meaning: Whirlpool dishwasher overflow detected; excessive water supply, defective water inlet valve, or drainage issue.
F6 Error Code (Whirlpool dishwasher Motor Error)
Meaning: Motor malfunction detected; faulty motor, motor wiring issue, or control board failure.
F7 Error Code (Whirlpool dishwasher Water Drainage Error)
Meaning: Whirlpool dishwasher drainage problem; clogged drain hose, pump obstruction, or pump motor failure.
F8 Error Code (Whirlpool dishwasher Water Supply Error)
Meaning: Whirlpool dishwasher not filling with water; water inlet valve malfunction, water pressure issue, or clogged inlet screen.
F9 Error Code (Whirlpool dishwasher Drain Pump Error)
Meaning: Whirlpool dishwasher pump failure; water not draining, pump motor fault, or drain blockage.
F10 Error Code (Whirlpool dishwasher Pressure Switch Error)
Meaning: Whirlpool dishwasher pressure switch malfunction; water level sensor fault or wiring problem.
F11 Error Code (Whirlpool dishwasher Control Board Error)
Meaning: Whirlpool dishwasher control board issue; communication failure between components or faulty PCB.
F12 Error Code (Whirlpool dishwasher Sensor Error)
Meaning: Whirlpool dishwasher sensor malfunction; temperature, pressure, or flow sensor failure.
F13 Error Code (Whirlpool dishwasher Wash Motor Error)
Meaning: Whirlpool dishwasher wash motor failure; motor obstruction, wiring issue, or defective motor.
F14 Error Code (Whirlpool dishwasher Rinse Aid Dispenser Error)
Meaning: Rinse aid dispenser malfunction; dispenser not working, blocked, or faulty control system.
F15 Error Code (Whirlpool dishwasher Dishwasher Door Lock Error)
Meaning: Whirlpool dishwasher door not locking or unlocking properly; latch or motor failure, wiring issue.
F16 Error Code (Whirlpool dishwasher Float Switch Error)
Meaning: Whirlpool dishwasher float switch problem; stuck or malfunctioning float switch, flooding risk.
F17 Error Code (Whirlpool dishwasher Water Temperature Too Low)
Meaning: Whirlpool dishwasher water temperature too low for effective washing; heating element failure, thermostat issue.
F18 Error Code (Whirlpool dishwasher Water Level Error)
Meaning: Whirlpool dishwasher detects incorrect water level; blocked drain, faulty water level sensor, or pressure switch failure.
F19 Error Code (Whirlpool dishwasher Communication Error)
Meaning: Whirlpool dishwasher communication failure between control boards; defective wiring or PCB problem.
F20 Error Code (Whirlpool dishwasher Drying System Error)
Meaning: Whirlpool dishwasher drying system malfunction; fan, heating element, or drying cycle failure.

Whirlpool Oven Error Codes

F0 Error Code (Whirlpool oven Keypad Error)
Meaning: Whirlpool oven keypad or touchpad malfunction; stuck button, unresponsive control, or wiring issue.
F1 Error Code (Whirlpool oven Control Board Error)
Meaning: Whirlpool oven control board failure; PCB malfunction, communication error, or power surge.
F2 Error Code (Whirlpool oven Overheating Error)
Meaning: Whirlpool oven temperature too high; oven overheating, thermostat failure, or control board fault.
F3 Error Code (Whirlpool oven Temperature Sensor Error)
Meaning: Whirlpool oven temperature sensor issue; malfunctioning thermistor or faulty sensor wiring.
F4 Error Code (Whirlpool oven Shorted Sensor)
Meaning: Whirlpool oven temperature sensor shorted; sensor failure, wiring issue, or faulty connection.
F5 Error Code (Whirlpool oven Relay Error)
Meaning: Whirlpool oven relay failure; stuck relay, defective relay board, or malfunction in the heating system.
F6 Error Code (Whirlpool oven Door Lock Error)
Meaning: Whirlpool oven door lock malfunction; door latch failure, control lock issue, or wiring problem.
F7 Error Code (Whirlpool oven Touchpad Error)
Meaning: Whirlpool oven touchpad malfunction; unresponsive buttons, faulty control panel, or touchpad wiring issue.
F8 Error Code (Whirlpool oven Bake Element Error)
Meaning: Whirlpool oven bake element failure; faulty heating element or wiring issue.
F9 Error Code (Whirlpool oven Oven Door Open Error)
Meaning: Whirlpool oven door detected open during self-clean cycle; door latch or sensor problem.
F10 Error Code (Whirlpool oven Cooling Fan Error)
Meaning: Whirlpool oven cooling fan failure; fan motor malfunction, blockage, or wiring issue.
F11 Error Code (Whirlpool oven Communication Error)
Meaning: Whirlpool oven communication failure; issue between control board and other components.
F12 Error Code (Whirlpool oven Thermistor Error)
Meaning: Whirlpool oven thermistor failure; temperature sensor malfunction, inaccurate readings.
F13 Error Code (Whirlpool oven Oven Lock Error)
Meaning: Whirlpool oven self-clean door lock malfunction; faulty lock system or door latch failure.
F14 Error Code (Whirlpool oven Voltage Error)
Meaning: Whirlpool oven voltage issue; electrical supply fluctuation, power surge, or control board malfunction.
F15 Error Code (Whirlpool oven Door Switch Error)
Meaning: Whirlpool oven door switch failure; door not detected as closed or switch wiring issue.
F16 Error Code (Whirlpool oven Igniter Error)
Meaning: Whirlpool oven gas igniter failure; problem with ignition system, no flame or spark.
F17 Error Code (Whirlpool oven Oven Temperature Error)
Meaning: Whirlpool oven temperature regulation issue; faulty thermostat, control board, or sensor malfunction.
F18 Error Code (Whirlpool oven Oven Relay Error)
Meaning: Whirlpool oven relay failure; relay system malfunction causing heating issue.
F19 Error Code (Whirlpool oven Self-Cleaning Error)
Meaning: Whirlpool oven self-clean cycle malfunction; temperature sensor or door lock failure during cleaning.

Maytag Refrigerator Error Codes

F0 Error Code (Maytag refrigerator Thermistor Error)
Meaning: Maytag refrigerator thermistor malfunction; temperature sensor not functioning properly, inaccurate temperature readings.
F1 Error Code (Maytag refrigerator Main Control Board Error)
Meaning: Main control board failure; PCB communication error or malfunction in the refrigerator's primary control system.
F2 Error Code (Maytag refrigerator Evaporator Fan Error)
Meaning: Evaporator fan motor issue; malfunctioning fan motor, airflow problem, or motor wiring fault.
F3 Error Code (Maytag refrigerator Defrost Sensor Error)
Meaning: Defrost sensor malfunction; faulty defrost thermostat, sensor circuit failure, or defrost timer issue.
F4 Error Code (Maytag refrigerator Defrost Heater Error)
Meaning: Defrost heater failure; malfunctioning heater element or thermostat during the defrost cycle.
F5 Error Code (Maytag refrigerator Ice Maker Error)
Meaning: Ice maker malfunction; issues with water supply, ice tray motor, or a jammed ice maker mechanism.
F6 Error Code (Maytag refrigerator Damper Control Error)
Meaning: Damper control system failure; improper airflow regulation between the freezer and refrigerator sections.
F7 Error Code (Maytag refrigerator Condenser Fan Error)
Meaning: Condenser fan failure; motor not running, fan obstruction, or electrical wiring issue affecting fan performance.
F8 Error Code (Maytag refrigerator Water Inlet Valve Error)
Meaning: Water inlet valve malfunction; blockage, clogging, or failure to allow water flow to the ice maker or water dispenser.
F9 Error Code (Maytag refrigerator High Temperature Error)
Meaning: Refrigerator detected high temperature; internal temperature exceeds normal range, potentially due to compressor or cooling system failure.
F10 Error Code (Maytag refrigerator Compressor Error)
Meaning: Compressor malfunction; cooling system failure, compressor motor not functioning, or refrigerant issues.
F11 Error Code (Maytag refrigerator Door Switch Error)
Meaning: Refrigerator door switch failure; door not detected as closed or switch not functioning properly.
F12 Error Code (Maytag refrigerator Ice Dispenser Error)
Meaning: Ice dispenser motor failure; jammed ice, malfunctioning dispenser motor, or blockage in the ice chute.
F13 Error Code (Maytag refrigerator Flow Meter Error)
Meaning: Flow meter malfunction; improper water flow measurement to ice maker or dispenser, possibly due to clogging or sensor failure.
F14 Error Code (Maytag refrigerator Water Filter Error)
Meaning: Water filter issue; clogged or improperly installed water filter, affecting water flow to the dispenser and ice maker.
F15 Error Code (Maytag refrigerator Defrost Circuit Error)
Meaning: Whirlpool refrigerator defrost circuit failure; thermostat, heater, or timer fault preventing proper defrost cycle operation.
F16 Error Code (Maytag refrigerator Fan Motor Error)
Meaning: Fan motor failure; refrigerator's internal fan or evaporator fan motor malfunction affecting cooling performance.
F17 Error Code (Maytag refrigerator Refrigeration System Error)
Meaning: Malfunction in the refrigeration system; compressor issue, refrigerant leak, or airflow disruption leading to improper cooling.
F18 Error Code (Maytag refrigerator Leakage Error)
Meaning: Maytag refrigerator detects water leakage; internal leak in water lines, ice maker, or drain system.
F19 Error Code (Maytag refrigerator Electrical Supply Error)
Meaning: Power supply issue; voltage fluctuation or power surges affecting the refrigerator’s control system.

Maytag Washer Error Codes

F0 Error Code (Maytag washer Main Control Error)
Meaning: Maytag washer main control board malfunction; failure in communication or power supply to the control board.
F1 Error Code (Maytag washer Door Lock Error)
Meaning: Door lock issue detected; malfunction in the door latch, locking mechanism, or door switch.
F2 Error Code (Maytag washer Water Drainage Error)
Meaning: Whirlpool washer drainage issue; clogged drain pump, hose obstruction, or pump motor failure.
F3 Error Code (Maytag washer Water Level Sensor Error)
Meaning: Pressure sensor fault; incorrect water level detection, faulty sensor, or wiring problem.
F4 Error Code (Maytag washer Door Switch Error)
Meaning: Washer door not closing properly; door switch malfunction, door misalignment, or wiring issue.
F5 Error Code (Maytag washer Water Supply Error)
Meaning: Insufficient water supply detected; blocked inlet valve, faulty water pressure, or hose issue.
F6 Error Code (Maytag washer Motor Control Error)
Meaning: Motor control failure; wiring issue, motor overload, or failure in communication between motor and control board.
F7 Error Code (Maytag washer Unbalanced Load Error)
Meaning: Washer detects unbalanced load; improper load distribution, overloaded drum, or suspension issue.
F8 Error Code (Maytag washer Low Water Flow)
Meaning: Water flow is insufficient; clogged filters, water inlet valve problem, or hose obstruction.
F9 Error Code (Maytag washer Excessive Suds Error)
Meaning: Excessive detergent causing suds overflow; improper detergent use, overuse of detergent, or detergent buildup.
F10 Error Code (Maytag washer Overheating Error)
Meaning: Washer overheating detected; faulty temperature sensor, water heater malfunction, or control board issue.
F11 Error Code (Maytag washer Pressure Switch Error)
Meaning: Pressure switch malfunction; incorrect water level reading or faulty wiring affecting water level detection.
F12 Error Code (Maytag washer Motor Speed Error)
Meaning: Motor not reaching the required speed; motor control fault, belt issue, or drum obstruction.
F13 Error Code (Maytag washer Drain Pump Error)
Meaning: Drain pump failure; pump not functioning, obstructed drain, or failure in drainage system.
F14 Error Code (Maytag washer Door Lock Fault)
Meaning: Door lock mechanism not functioning; defective door latch, faulty lock switch, or misalignment.
F15 Error Code (Maytag washer Control Board Error)
Meaning: Washer control board malfunction; software issue, communication failure, or control system fault.
F16 Error Code (Maytag washer Thermistor Error)
Meaning: Thermistor fault; malfunctioning temperature sensor, incorrect water temperature detection.
F17 Error Code (Maytag washer Shifter Actuator Error)
Meaning: Shifter actuator malfunction; failure in the drive system, incorrect motor operation, or control issue.
F18 Error Code (Maytag washer Leakage Error)
Meaning: Leakage detected; washer leaking from hoses, drum, or pump system.
F19 Error Code (Maytag washer Door Switch Circuit Error)
Meaning: Door switch circuit failure; improper door switch operation, misconnection, or defective door switch.

Maytag Dryer Error Codes

F0 Error Code (Maytag dryer Primary Control Error)
Meaning: Maytag dryer main control board malfunction; PCB communication failure, control board issue, or power surge.
F1 Error Code (Maytag dryer Control Board Error)
Meaning: Maytag dryer control board issue; wiring problem, software error, or PCB failure affecting dryer operation.
F2 Error Code (Maytag dryer Heater Relay Stuck)
Meaning: Heater relay malfunction; relay stuck in the "on" position, heating element continuously active, or relay board fault.
F3 Error Code (Maytag dryer Thermistor Error)
Meaning: Thermistor malfunction; faulty temperature sensor, short circuit, or incorrect temperature readings.
F4 Error Code (Maytag dryer Door Switch Error)
Meaning: Dryer door switch issue; door not properly closed, door latch malfunction, or switch wiring failure.
F5 Error Code (Maytag dryer Moisture Sensor Error)
Meaning: Moisture sensor failure; inaccurate drying cycle readings, dirty sensor, or faulty wiring.
F6 Error Code (Maytag dryer Communication Error)
Meaning: Maytag dryer control board communication error; failure between control board and motor or other components.
F7 Error Code (Maytag dryer Motor Speed Error)
Meaning: Motor failure; motor cannot reach required speed, motor wiring issue, or motor control problem.
F8 Error Code (Maytag dryer Low Airflow)
Meaning: Restricted airflow; blocked vent, lint buildup in the filter or duct, or blower motor failure.
F9 Error Code (Maytag dryer Long Drying Time)
Meaning: Dryer taking too long to dry clothes; vent blockage, overheating, or heating element failure.
AF Error Code (Maytag dryer Airflow Restricted)
Meaning: Airflow restricted in the vent system; lint trap, hose, or vent duct obstruction, leading to inefficient drying.
PF Error Code (Maytag dryer Power Failure)
Meaning: Power interruption during drying cycle; electrical issue, power surge, or faulty power supply.
L2 Error Code (Maytag dryer Low Voltage)
Meaning: Low voltage detected; improper voltage supply, power cord issue, or outlet problem.
E1 Error Code (Maytag dryer Thermal Fuse Error)
Meaning: Thermal fuse blown; overheating detected, often caused by a clogged vent or restricted airflow.
E2 Error Code (Maytag dryer Drum Motor Error)
Meaning: Drum motor failure; motor obstruction, malfunction, or drive system issue affecting drum rotation.
E3 Error Code (Maytag dryer Control Panel Error)
Meaning: Control panel failure; faulty keypad, wiring issue, or connection problem with the control board.
F10 Error Code (Maytag dryer Overheating Error)
Meaning: Dryer detected overheating; malfunction in temperature sensors, heating element, or thermostat.
LOC Error Code (Maytag dryer Control Lock Activated)
Meaning: Control lock engaged; child lock feature preventing dryer from starting or controlling buttons.
E4 Error Code (Maytag dryer Blower Motor Error)
Meaning: Blower motor failure; motor not operating properly, clogging, or fan obstruction.
E5 Error Code (Maytag dryer Start Switch Error)
Meaning: Start switch malfunction; faulty switch or wiring issue preventing the dryer from starting.

Maytag Dishwasher Error Codes

F1 Error Code (Maytag dishwasher Flood Switch Error)
Meaning: Maytag dishwasher detects water in the base or leaks; flood switch triggered, potentially due to a water leak, faulty pump, or drainage issue.
F2 Error Code (Maytag dishwasher Heating Error)
Meaning: Heating element malfunction detected; issues with the water heater, thermostat, or a failure in the heating system.
F3 Error Code (Maytag dishwasher Water Temperature Sensor Error)
Meaning: Water temperature sensor malfunction; inaccurate temperature readings, faulty sensor, or wiring problems affecting wash cycle performance.
F4 Error Code (Maytag dishwasher Door Switch Error)
Meaning: Door switch issue; dishwasher door not detected as properly closed, or malfunctioning door switch preventing operation.
F5 Error Code (Maytag dishwasher Overflow Error)
Meaning: Dishwasher overflow detected; defective water inlet valve, blocked drain hose, or malfunctioning pressure switch causing excessive water flow.
F6 Error Code (Maytag dishwasher Motor Error)
Meaning: Dishwasher motor failure; motor failure, pump obstruction, or a malfunction preventing the dishwasher from circulating water properly.
F7 Error Code (Maytag dishwasher Water Drainage Error)
Meaning: Drainage problem detected; clogged drain hose, faulty drain pump, or an obstruction in the dishwasher drainage system.
F8 Error Code (Maytag dishwasher Water Supply Error)
Meaning: Insufficient water supply detected; blocked water inlet valve, low water pressure, or clog in the inlet filter affecting the wash cycle.
F9 Error Code (Maytag dishwasher Drain Pump Error)
Meaning: Drain pump failure; pump malfunction or clog preventing water from draining from the dishwasher during the cycle.
F10 Error Code (Maytag dishwasher Pressure Switch Error)
Meaning: Pressure switch malfunction; water level not detected correctly, potentially due to a faulty pressure switch or wiring issues.
F11 Error Code (Maytag dishwasher Control Board Error)
Meaning: Main control board failure; communication error between control board and other components, possibly due to power surges or wiring problems.
F12 Error Code (Maytag dishwasher Sensor Error)
Meaning: Sensor malfunction; temperature, flow, or pressure sensors not functioning properly, resulting in incorrect readings.
F13 Error Code (Maytag dishwasher Wash Motor Error)
Meaning: Wash motor failure; issues with the motor affecting water circulation, spray arm movement, or proper wash cycle operation.
F14 Error Code (Maytag dishwasher Rinse Aid Dispenser Error)
Meaning: Rinse aid dispenser malfunction; rinse aid not dispensing properly, or dispenser valve clog or failure.
F15 Error Code (Maytag dishwasher Dishwasher Door Lock Error)
Meaning: Door lock failure; dishwasher door not locking or unlocking properly, potentially due to a faulty motor or sensor.
F16 Error Code (Maytag dishwasher Float Switch Error)
Meaning: Float switch malfunction; dishwasher unable to detect water level correctly, potentially causing overflow or underfilling issues.
F17 Error Code (Maytag dishwasher Water Temperature Too Low)
Meaning: Water temperature too low for proper washing; heating element malfunction, thermostat failure, or water supply issue.
F18 Error Code (Maytag dishwasher Water Level Error)
Meaning: Incorrect water level detected; blocked drain, faulty water level sensor, or pressure switch malfunction affecting water filling.
F19 Error Code (Maytag dishwasher Communication Error)
Meaning: Communication failure between control boards; defective wiring, poor connection, or malfunctioning control board.
F20 Error Code (Maytag dishwasher Drying System Error)
Meaning: Dryer system malfunction; drying fan, heating element, or drying cycle failure affecting the final drying phase of the wash cycle.

Maytag Oven Error Codes

F0 Error Code (Maytag Oven Keypad Error)
Meaning: Maytag oven keypad or touchpad malfunction; stuck button, unresponsive control, or wiring issue in the control panel.
F1 Error Code (Maytag Oven Control Board Error)
Meaning: Maytag oven main control board failure; communication problem between control board and oven components, or a hardware issue in the system.
F2 Error Code (Maytag Oven Overheating Error)
Meaning: Maytag oven temperature too high; overheating detected, thermostat failure, or control board malfunction in regulating oven temperature.
F3 Error Code (Maytag Oven Temperature Sensor Error)
Meaning: Maytag oven temperature sensor malfunction; inaccurate temperature readings, faulty thermistor, or wiring issue with the temperature sensor.
F4 Error Code (Maytag Oven Shorted Sensor)
Meaning: Maytag oven temperature sensor shorted; sensor failure, wiring issue, or faulty connection causing continuous high temperature readings.
F5 Error Code (Maytag Oven Relay Error)
Meaning: Maytag oven relay failure; relay switch stuck or malfunctioning, causing heating element or fan to remain on or off.
F6 Error Code (Maytag Oven Door Lock Error)
Meaning: Maytag oven door lock malfunction; issue with self-clean door lock mechanism, latch failure, or wiring problem during the cleaning cycle.
F7 Error Code (Maytag Oven Touchpad Error)
Meaning: Maytag oven touchpad malfunction; unresponsive buttons, faulty control panel, or wiring issue in the touchpad or control board.
F8 Error Code (Maytag Oven Bake Element Error)
Meaning: Maytag oven bake element failure; problem with the heating element in the oven's baking function, such as a broken or disconnected element.
F9 Error Code (Maytag Oven Door Open Error)
Meaning: Maytag oven door detected open during self-clean cycle; door latch or sensor issue preventing the door from locking properly.
F10 Error Code (Maytag Oven Cooling Fan Error)
Meaning: Maytag oven cooling fan malfunction; fan motor failure, debris obstruction, or wiring issue preventing proper cooling during and after cooking.
F11 Error Code (Maytag Oven Communication Error)
Meaning: Maytag oven communication failure; control board error in communicating with other oven components like heating elements or sensors.
F12 Error Code (Maytag Oven Thermistor Error)
Meaning: Maytag oven thermistor failure; malfunction in the temperature sensor, causing inaccurate temperature readings and improper heating.
F13 Error Code (Maytag Oven Oven Lock Error)
Meaning: Maytag oven self-clean door lock malfunction; failure in the automatic door lock system, preventing proper locking during cleaning.
F14 Error Code (Maytag Oven Voltage Error)
Meaning: Maytag oven voltage fluctuation or issue with the power supply to the oven; power surge or insufficient voltage to operate the control system.
F15 Error Code (Maytag Oven Door Switch Error)
Meaning: Maytag oven door switch failure; door not detected as closed or latched, preventing the oven from operating properly.
F16 Error Code (Maytag Oven Igniter Error)
Meaning: Maytag oven gas igniter malfunction; failure to ignite the gas burner, faulty igniter, or wiring issue in the ignition system.
F17 Error Code (Maytag Oven Oven Temperature Error)
Meaning: Maytag oven temperature regulation issue; faulty thermostat, sensor, or control board malfunction preventing accurate temperature control.
F18 Error Code (Maytag Oven Oven Relay Error)
Meaning: Maytag oven relay system malfunction; failure in relay switches affecting the operation of heating elements or other oven components.
F19 Error Code (Maytag Oven Self-Cleaning Error)
Meaning: Maytag oven self-clean cycle malfunction; issue with the temperature sensor or door lock during the self-cleaning process, preventing completion.

Kenmore Refrigerator Error Codes

F0 Error Code (Kenmore Refrigerator Thermistor Error)
Meaning: Kenmore refrigerator thermistor malfunction; faulty temperature sensor or improper temperature readings in the fridge or freezer.
F1 Error Code (Kenmore Refrigerator Main Control Board Error)
Meaning: Kenmore refrigerator control board failure; communication problem between the main control board and other components.
F2 Error Code (Kenmore Refrigerator Evaporator Fan Error)
Meaning: Kenmore refrigerator evaporator fan motor failure; fan not circulating air properly, causing cooling issues or uneven temperatures.
F3 Error Code (Kenmore Refrigerator Defrost Sensor Error)
Meaning: Kenmore refrigerator defrost sensor malfunction; failure in the defrost system, causing ice buildup or improper cooling.
F4 Error Code (Kenmore Refrigerator Defrost Heater Error)
Meaning: Kenmore refrigerator defrost heater issue; heater malfunction during the defrost cycle, causing ice accumulation or cooling problems.
F5 Error Code (Kenmore Refrigerator Ice Maker Error)
Meaning: Kenmore refrigerator ice maker failure; issues with water supply, jammed ice tray, or motor malfunction.
F6 Error Code (Kenmore Refrigerator Damper Control Error)
Meaning: Kenmore refrigerator damper control malfunction; improper airflow regulation between the freezer and refrigerator sections.
F7 Error Code (Kenmore Refrigerator Condenser Fan Error)
Meaning: Kenmore refrigerator condenser fan motor failure; clogged or obstructed fan preventing efficient heat dissipation.
F8 Error Code (Kenmore Refrigerator Water Inlet Valve Error)
Meaning: Kenmore refrigerator water inlet valve failure; blocked or malfunctioning valve, affecting the ice maker or water dispenser.
F9 Error Code (Kenmore Refrigerator High Temperature Error)
Meaning: Kenmore refrigerator detected high temperature; internal temperature exceeds safe range due to compressor failure or improper cooling.
F10 Error Code (Kenmore Refrigerator Compressor Error)
Meaning: Kenmore refrigerator compressor failure; compressor not working properly, impacting the fridge's ability to cool effectively.
F11 Error Code (Kenmore Refrigerator Door Switch Error)
Meaning: Kenmore refrigerator door switch failure; door not detected as properly closed or latched, impacting operation.
F12 Error Code (Kenmore Refrigerator Ice Dispenser Error)
Meaning: Kenmore refrigerator ice dispenser malfunction; jammed ice chute, faulty dispenser motor, or blocked mechanism.
F13 Error Code (Kenmore Refrigerator Flow Meter Error)
Meaning: Kenmore refrigerator flow meter malfunction; incorrect water flow reading, affecting the water dispenser or ice maker.
F14 Error Code (Kenmore Refrigerator Water Filter Error)
Meaning: Kenmore refrigerator water filter issue; clogged or improperly installed water filter, affecting water quality or dispenser flow.
F15 Error Code (Kenmore Refrigerator Defrost Circuit Error)
Meaning: Kenmore refrigerator defrost circuit malfunction; issue with the heater, thermostat, or timer, causing excessive frost buildup.
F16 Error Code (Kenmore Refrigerator Fan Motor Error)
Meaning: Kenmore refrigerator fan motor failure; fan not circulating air, leading to improper cooling or temperature fluctuations.
F17 Error Code (Kenmore Refrigerator Refrigeration System Error)
Meaning: Kenmore refrigerator refrigeration system malfunction; compressor, refrigerant leak, or airflow problem causing poor cooling.
F18 Error Code (Kenmore Refrigerator Leakage Error)
Meaning: Kenmore refrigerator detects a water leak; water line issue, internal leak, or drainage system malfunction.
F19 Error Code (Kenmore Refrigerator Electrical Supply Error)
Meaning: Kenmore refrigerator electrical supply issue; voltage fluctuations or power surges affecting the refrigerator's operation.

Kenmore Washer Error Codes

F0 Error Code (Kenmore Washer Door Lock Error)
Meaning: Kenmore washer detects a door lock malfunction; door not properly latched, door switch failure, or wiring issue.
F1 Error Code (Kenmore Washer Main Control Board Error)
Meaning: Kenmore washer main control board failure; communication issue between control board and other washer components.
F2 Error Code (Kenmore Washer Water Drainage Error)
Meaning: Kenmore washer not draining water; clogged drain pump, hose obstruction, or pump motor failure.
F3 Error Code (Kenmore Washer Water Level Sensor Error)
Meaning: Kenmore washer pressure sensor malfunction; incorrect water level reading, faulty sensor, or wiring issue.
F4 Error Code (Kenmore Washer Door Switch Error)
Meaning: Kenmore washer door switch failure; washer door not detected as closed, affecting cycle progress.
F5 Error Code (Kenmore Washer Water Supply Error)
Meaning: Kenmore washer not receiving water; blocked water inlet valve, low water pressure, or hose obstruction.
F6 Error Code (Kenmore Washer Motor Control Error)
Meaning: Kenmore washer motor control failure; communication issue between motor and control board, motor overload, or wiring problem.
F7 Error Code (Kenmore Washer Unbalanced Load Error)
Meaning: Kenmore washer detects an unbalanced load; improper load distribution, overloaded drum, or suspension system issue.
F8 Error Code (Kenmore Washer Low Water Flow)
Meaning: Kenmore washer detects low water flow; clogged filters, faulty water valve, or issue with water supply.
F9 Error Code (Kenmore Washer Excessive Suds Error)
Meaning: Kenmore washer detects excessive suds; too much detergent used or excessive foam preventing proper spin cycle.
F10 Error Code (Kenmore Washer Overheating Error)
Meaning: Kenmore washer overheating detected; problem with heating element, thermistor, or water temperature sensor.
F11 Error Code (Kenmore Washer Motor Speed Error)
Meaning: Kenmore washer motor unable to reach the required speed; motor control issue, defective drive system, or belt malfunction.
F12 Error Code (Kenmore Washer Pressure Switch Error)
Meaning: Kenmore washer pressure switch malfunction; incorrect water level detection, possibly due to faulty wiring or a stuck switch.
F13 Error Code (Kenmore Washer Drain Pump Error)
Meaning: Kenmore washer drain pump failure; malfunctioning pump, clogged drain hose, or drainage system obstruction.
F14 Error Code (Kenmore Washer Lid Switch Error)
Meaning: Kenmore washer lid switch issue; faulty lid switch or sensor preventing the washer from starting.
F15 Error Code (Kenmore Washer Control Board Error)
Meaning: Kenmore washer control board malfunction; PCB issue affecting communication with components or system failure.
F16 Error Code (Kenmore Washer Motor Overload Error)
Meaning: Kenmore washer motor overload; excessive load, mechanical failure, or motor wiring issue causing the motor to stop working.
F17 Error Code (Kenmore Washer Shifter Actuator Error)
Meaning: Kenmore washer shift actuator malfunction; failure in the actuator system preventing proper drum movement during cycles.
F18 Error Code (Kenmore Washer Leak Error)
Meaning: Kenmore washer detects a water leak; leakage from hoses, pump, or drum during washing or draining.
F19 Error Code (Kenmore Washer Door Switch Circuit Error)
Meaning: Kenmore washer door switch circuit issue; improper door switch operation, misconnection, or defective door switch affecting cycle.

Kenmore Dryer Error Codes

F0 Error Code (Kenmore Dryer Primary Control Error)
Meaning: Kenmore dryer main control board malfunction; communication failure between the control board and dryer components.
F1 Error Code (Kenmore Dryer Control Board Error)
Meaning: Kenmore dryer control board issue; faulty wiring or malfunction preventing proper operation of the dryer.
F2 Error Code (Kenmore Dryer Heating Element Error)
Meaning: Kenmore dryer heating element failure; issue with the element, wiring, or temperature sensor.
F3 Error Code (Kenmore Dryer Thermistor Error)
Meaning: Kenmore dryer thermistor malfunction; faulty temperature sensor, leading to inaccurate readings or overheating.
F4 Error Code (Kenmore Dryer Door Switch Error)
Meaning: Kenmore dryer door switch failure; door not detected as closed, preventing the dryer from starting or operating.
F5 Error Code (Kenmore Dryer Moisture Sensor Error)
Meaning: Kenmore dryer moisture sensor failure; inaccurate moisture readings leading to improper drying cycles.
F6 Error Code (Kenmore Dryer Communication Error)
Meaning: Kenmore dryer communication failure; control board not communicating with other components like the motor or sensors.
F7 Error Code (Kenmore Dryer Motor Error)
Meaning: Kenmore dryer motor issue; motor malfunction, motor overload, or wiring fault preventing proper drum rotation.
F8 Error Code (Kenmore Dryer Low Airflow)
Meaning: Kenmore dryer restricted airflow; clogged lint filter, duct obstruction, or blower motor failure.
F9 Error Code (Kenmore Dryer Long Drying Time)
Meaning: Kenmore dryer taking too long to dry clothes; vent obstruction, heating issue, or excessive moisture preventing efficient drying.
AF Error Code (Kenmore Dryer Airflow Restricted)
Meaning: Kenmore dryer airflow restriction; clogged vent, lint buildup in ducts, or issues with the blower motor leading to poor drying performance.
PF Error Code (Kenmore Dryer Power Failure)
Meaning: Kenmore dryer power interruption; voltage fluctuation or power surge during the drying cycle, causing a restart.
L2 Error Code (Kenmore Dryer Low Voltage)
Meaning: Kenmore dryer detects low voltage; electrical supply issue, improper voltage reaching the dryer from the power source.
E1 Error Code (Kenmore Dryer Thermal Fuse Error)
Meaning: Kenmore dryer thermal fuse blown; thermal fuse failure due to overheating, often caused by clogged vents or restricted airflow.
E2 Error Code (Kenmore Dryer Drum Motor Error)
Meaning: Kenmore dryer drum motor malfunction; motor failure, overload, or obstruction preventing the drum from spinning.
E3 Error Code (Kenmore Dryer Control Panel Error)
Meaning: Kenmore dryer control panel malfunction; faulty display, unresponsive controls, or communication issue with the control board.
F10 Error Code (Kenmore Dryer Overheating Error)
Meaning: Kenmore dryer overheating detected; issue with the temperature sensor, thermostat, or heating element causing excessive heat buildup.
LOC Error Code (Kenmore Dryer Control Lock Activated)
Meaning: Kenmore dryer control panel locked; child lock feature preventing any changes to settings or cycle progression.
E4 Error Code (Kenmore Dryer Blower Motor Error)
Meaning: Kenmore dryer blower motor failure; fan motor not working, affecting airflow and drying performance.
E5 Error Code (Kenmore Dryer Start Switch Error)
Meaning: Kenmore dryer start switch malfunction; faulty start button or wiring problem preventing the dryer from starting.

Kenmore Oven Error Codes

F0 Error Code (Kenmore Oven Keypad Error)
Meaning: Kenmore oven keypad or touchpad malfunction; unresponsive or stuck buttons, faulty wiring or connection in the control panel.
F1 Error Code (Kenmore Oven Control Board Error)
Meaning: Kenmore oven main control board failure; communication problem between the control board and other oven components.
F2 Error Code (Kenmore Oven Overheating Error)
Meaning: Kenmore oven overheating detected; issue with the thermostat, temperature sensor, or control board causing excessive heat buildup.
F3 Error Code (Kenmore Oven Temperature Sensor Error)
Meaning: Kenmore oven temperature sensor malfunction; inaccurate temperature readings or faulty sensor wiring affecting the oven's heat regulation.
F4 Error Code (Kenmore Oven Shorted Sensor)
Meaning: Kenmore oven temperature sensor shorted; failure in the sensor or its circuit, causing the oven to misread temperature levels.
F5 Error Code (Kenmore Oven Relay Error)
Meaning: Kenmore oven relay malfunction; relay switch failure preventing the proper operation of heating elements or fans.
F6 Error Code (Kenmore Oven Door Lock Error)
Meaning: Kenmore oven door lock malfunction; failure in the door lock system, preventing the oven from being locked during a self-clean cycle.
F7 Error Code (Kenmore Oven Touchpad Error)
Meaning: Kenmore oven touchpad failure; buttons on the control panel malfunctioning, unresponsive or stuck.
F8 Error Code (Kenmore Oven Bake Element Error)
Meaning: Kenmore oven bake element failure; malfunctioning heating element, causing improper heating during the baking cycle.
F9 Error Code (Kenmore Oven Door Open Error)
Meaning: Kenmore oven door detected open during a self-clean cycle; door latch or sensor malfunction, preventing proper cleaning cycle initiation.
F10 Error Code (Kenmore Oven Cooling Fan Error)
Meaning: Kenmore oven cooling fan failure; motor malfunction or wiring issue preventing proper cooling during or after cooking.
F11 Error Code (Kenmore Oven Communication Error)
Meaning: Kenmore oven control board communication failure; issue between control board and other components like heating elements or sensors.
F12 Error Code (Kenmore Oven Thermistor Error)
Meaning: Kenmore oven thermistor malfunction; incorrect temperature readings caused by faulty thermistor or connection issue.
F13 Error Code (Kenmore Oven Self-Clean Lock Error)
Meaning: Kenmore oven self-clean door lock malfunction; failure to lock the door properly during the self-clean cycle, preventing safe operation.
F14 Error Code (Kenmore Oven Voltage Error)
Meaning: Kenmore oven voltage issue; improper voltage supply or power surge affecting the control system or oven performance.
F15 Error Code (Kenmore Oven Door Switch Error)
Meaning: Kenmore oven door switch malfunction; door not detected as closed, preventing the oven from operating properly.
F16 Error Code (Kenmore Oven Igniter Error)
Meaning: Kenmore oven gas igniter failure; malfunction in the igniter system, causing failure to ignite the gas burner during cooking.
F17 Error Code (Kenmore Oven Temperature Control Error)
Meaning: Kenmore oven temperature regulation issue; faulty thermostat, temperature sensor, or control board preventing accurate heat control.
F18 Error Code (Kenmore Oven Relay Error)
Meaning: Kenmore oven relay system malfunction; failure in relay switches affecting heating elements or oven functions.
F19 Error Code (Kenmore Oven Self-Cleaning Error)
Meaning: Kenmore oven self-clean cycle malfunction; issue with the door lock or temperature sensor during the self-cleaning process, preventing it from completing.

Kenmore Dishwasher Error Codes

F1 Error Code (Kenmore Dishwasher Flood Switch Error)
Meaning: Kenmore dishwasher detects flooding; flood switch activated due to water leakage, pump malfunction, or drainage issue.
F2 Error Code (Kenmore Dishwasher Heating Error)
Meaning: Kenmore dishwasher heating system failure; malfunctioning heating element, thermostat, or wiring issue preventing proper water heating.
F3 Error Code (Kenmore Dishwasher Water Temperature Sensor Error)
Meaning: Kenmore dishwasher temperature sensor malfunction; inaccurate water temperature readings, affecting the washing cycle.
F4 Error Code (Kenmore Dishwasher Door Switch Error)
Meaning: Kenmore dishwasher door switch failure; door not properly closed or detected, preventing operation.
F5 Error Code (Kenmore Dishwasher Overflow Error)
Meaning: Kenmore dishwasher overflow detected; excessive water entering, possibly caused by a faulty inlet valve, pressure switch, or hose blockage.
F6 Error Code (Kenmore Dishwasher Motor Error)
Meaning: Kenmore dishwasher motor malfunction; wash motor failure, motor wiring issue, or obstruction preventing proper water circulation.
F7 Error Code (Kenmore Dishwasher Water Drainage Error)
Meaning: Kenmore dishwasher drainage issue; clogged drain hose, faulty drain pump, or blockages in the drainage system.
F8 Error Code (Kenmore Dishwasher Water Supply Error)
Meaning: Kenmore dishwasher not filling with water; problem with the water inlet valve, water pressure issue, or hose obstruction.
F9 Error Code (Kenmore Dishwasher Drain Pump Error)
Meaning: Kenmore dishwasher pump failure; water not draining, pump motor malfunction, or blockage preventing proper drainage.
F10 Error Code (Kenmore Dishwasher Pressure Switch Error)
Meaning: Kenmore dishwasher pressure switch malfunction; failure to detect proper water level, or faulty wiring to the switch.
F11 Error Code (Kenmore Dishwasher Control Board Error)
Meaning: Kenmore dishwasher control board failure; communication issue between the control board and other components like the motor or sensors.
F12 Error Code (Kenmore Dishwasher Sensor Error)
Meaning: Kenmore dishwasher sensor malfunction; temperature, flow, or pressure sensor failure causing operational disruptions.
F13 Error Code (Kenmore Dishwasher Wash Motor Error)
Meaning: Kenmore dishwasher wash motor failure; motor malfunction, wiring fault, or a blocked motor preventing proper washing.
F14 Error Code (Kenmore Dishwasher Rinse Aid Dispenser Error)
Meaning: Kenmore dishwasher rinse aid dispenser malfunction; blocked or faulty dispenser valve preventing the release of rinse aid.
F15 Error Code (Kenmore Dishwasher Door Lock Error)
Meaning: Kenmore dishwasher door not locking properly; latch or motor failure, preventing the door from securing during cycles.
F16 Error Code (Kenmore Dishwasher Float Switch Error)
Meaning: Kenmore dishwasher float switch malfunction; failure to detect water level correctly, potentially causing overflow or underfilling.
F17 Error Code (Kenmore Dishwasher Water Temperature Too Low)
Meaning: Kenmore dishwasher water temperature too low for effective washing; issue with the heating element or thermostat not reaching the required temperature.
F18 Error Code (Kenmore Dishwasher Water Level Error)
Meaning: Kenmore dishwasher detects incorrect water level; blocked drain, faulty water level sensor, or pressure switch malfunction.
F19 Error Code (Kenmore Dishwasher Communication Error)
Meaning: Kenmore dishwasher communication failure; problem with the wiring or control boards failing to communicate between key components.
F20 Error Code (Kenmore Dishwasher Drying System Error)
Meaning: Kenmore dishwasher drying system malfunction; failure in the fan, heating element, or drying cycle system.

Kenmore Microwave Error Codes

F0 Error Code (Kenmore Microwave Keypad Error)
Meaning: Kenmore microwave keypad malfunction; unresponsive or stuck buttons, touchpad failure, or wiring issue between the keypad and control board.
F1 Error Code (Kenmore Microwave Control Board Error)
Meaning: Kenmore microwave main control board failure; communication issue or malfunction in the control board affecting microwave functions.
F2 Error Code (Kenmore Microwave Door Switch Error)
Meaning: Kenmore microwave door switch failure; door not detected as properly closed, preventing the microwave from operating.
F3 Error Code (Kenmore Microwave Temperature Sensor Error)
Meaning: Kenmore microwave temperature sensor malfunction; inaccurate temperature readings or failure to detect temperature properly.
F4 Error Code (Kenmore Microwave Magnetron Error)
Meaning: Kenmore microwave magnetron malfunction; failure of the magnetron to produce heat, leading to no cooking or improper heating.
F5 Error Code (Kenmore Microwave Relay Error)
Meaning: Kenmore microwave relay malfunction; stuck or faulty relay, preventing the microwave from initiating cooking or stopping prematurely.
F6 Error Code (Kenmore Microwave Humidity Sensor Error)
Meaning: Kenmore microwave humidity sensor malfunction; sensor failure causing improper cooking times or undercooked food.
F7 Error Code (Kenmore Microwave Communication Error)
Meaning: Kenmore microwave communication failure; control board cannot communicate with other components like the magnetron or sensor.
F8 Error Code (Kenmore Microwave Motor Error)
Meaning: Kenmore microwave motor failure; turntable motor or fan motor malfunction, causing the turntable not to spin or fan not operating.
F9 Error Code (Kenmore Microwave Short Circuit Error)
Meaning: Kenmore microwave short circuit detected; faulty wiring or internal component short preventing microwave operation.
F10 Error Code (Kenmore Microwave Power Supply Error)
Meaning: Kenmore microwave power supply issue; voltage irregularity or interruption preventing the microwave from operating correctly.
F11 Error Code (Kenmore Microwave Overheating Error)
Meaning: Kenmore microwave detected overheating; internal temperature too high, possibly due to a cooling fan malfunction or vent obstruction.
F12 Error Code (Kenmore Microwave Fuse Error)
Meaning: Kenmore microwave fuse blown; internal fuse failure caused by power surge or malfunctioning components.
F13 Error Code (Kenmore Microwave Touchpad Error)
Meaning: Kenmore microwave touchpad malfunction; buttons unresponsive or stuck, preventing proper interaction with the microwave.
F14 Error Code (Kenmore Microwave Timer Error)
Meaning: Kenmore microwave timer malfunction; failure in the timer circuit, causing incorrect cook times or inability to set a timer.
F15 Error Code (Kenmore Microwave Cooling Fan Error)
Meaning: Kenmore microwave cooling fan failure; fan motor not operating, leading to overheating or inefficient cooling during cooking.
F16 Error Code (Kenmore Microwave Door Lock Error)
Meaning: Kenmore microwave door lock issue; failure to lock the door securely, possibly due to a broken latch or faulty sensor.
F17 Error Code (Kenmore Microwave Internal Short Circuit)
Meaning: Kenmore microwave detects an internal short circuit; likely caused by a damaged component, leading to operational failure.
F18 Error Code (Kenmore Microwave Motor Relay Error)
Meaning: Kenmore microwave motor relay malfunction; failure to control the motor properly, causing issues with the turntable or fan.
F19 Error Code (Kenmore Microwave Overcurrent Error)
Meaning: Kenmore microwave detects overcurrent; electrical overload, power surge, or a malfunction in the microwave’s power system.

Frigidaire Refrigerator Error Codes

E1 Error Code (Frigidaire Refrigerator Temperature Sensor Error)
Meaning: Frigidaire refrigerator temperature sensor malfunction; faulty thermistor or wiring issue causing inaccurate temperature readings in the fridge or freezer.
E2 Error Code (Frigidaire Refrigerator Evaporator Fan Error)
Meaning: Evaporator fan malfunction; motor failure or obstruction, causing improper airflow and uneven cooling inside the refrigerator.
E3 Error Code (Frigidaire Refrigerator Defrost Sensor Error)
Meaning: Defrost sensor malfunction; failure in the defrost cycle causing frost buildup or inadequate temperature control.
E4 Error Code (Frigidaire Refrigerator Defrost Heater Error)
Meaning: Defrost heater failure; malfunction in the defrost system, causing frost accumulation and improper temperature regulation.
E5 Error Code (Frigidaire Refrigerator Ice Maker Error)
Meaning: Ice maker failure; water supply issue, jammed ice tray, or motor malfunction preventing ice production.
E6 Error Code (Frigidaire Refrigerator Damper Control Error)
Meaning: Damper control malfunction; improper airflow between the freezer and refrigerator sections, affecting cooling performance.
E7 Error Code (Frigidaire Refrigerator Condenser Fan Error)
Meaning: Condenser fan motor failure; blocked fan, motor malfunction, or wiring issue preventing heat dissipation and proper cooling.
E8 Error Code (Frigidaire Refrigerator Water Inlet Valve Error)
Meaning: Water inlet valve failure; malfunction preventing water flow to the ice maker or water dispenser, leading to insufficient water supply.
E9 Error Code (Frigidaire Refrigerator High Temperature Error)
Meaning: Frigidaire refrigerator detects high internal temperature; cooling issue caused by a compressor malfunction, evaporator issue, or refrigeration system problem.
F1 Error Code (Frigidaire Refrigerator Main Control Board Error)
Meaning: Main control board failure; communication problem between control board and components, often leading to the refrigerator not operating.
F2 Error Code (Frigidaire Refrigerator Temperature Control Error)
Meaning: Temperature control malfunction; issue with the thermostat or control board preventing accurate temperature regulation.
F3 Error Code (Frigidaire Refrigerator Fan Motor Error)
Meaning: Fan motor malfunction; failure to circulate cold air, affecting overall temperature regulation and food storage conditions.
F4 Error Code (Frigidaire Refrigerator Freezer Temperature Sensor Error)
Meaning: Freezer temperature sensor failure; incorrect temperature readings or sensor malfunction causing poor freezing conditions.
F5 Error Code (Frigidaire Refrigerator Ice Dispenser Error)
Meaning: Ice dispenser malfunction; issues with the motor, control board, or ice chute preventing the proper dispensing of ice.
F6 Error Code (Frigidaire Refrigerator Compressor Error)
Meaning: Compressor malfunction; cooling issues due to a non-functional compressor, leading to inadequate refrigeration or freezer performance.
F7 Error Code (Frigidaire Refrigerator Door Switch Error)
Meaning: Door switch failure; door not detected as properly closed, affecting the refrigerator’s cooling system or the door alarm function.
F8 Error Code (Frigidaire Refrigerator Fan Relay Error)
Meaning: Fan relay malfunction; failure to properly control the fan motor, affecting airflow and temperature control.
F9 Error Code (Frigidaire Refrigerator Freezer Defrost Error)
Meaning: Freezer defrost issue; failure in the defrost heater, sensor, or timer, leading to frost buildup and reduced cooling efficiency.
F10 Error Code (Frigidaire Refrigerator Power Failure Error)
Meaning: Power failure or interruption; electrical issues causing the refrigerator to stop functioning, requiring reset or troubleshooting.
F11 Error Code (Frigidaire Refrigerator Communication Error)
Meaning: Communication failure between the main control board and other refrigerator components, often causing operational disruptions.

Frigidaire Washer Error Codes

E1 Error Code (Frigidaire Washer Water Inlet Error)
Meaning: Frigidaire washer not filling with water; blocked inlet valve, low water pressure, or hose obstruction affecting water supply.
E2 Error Code (Frigidaire Washer Drainage Error)
Meaning: Frigidaire washer unable to drain water; clogged drain hose, faulty drain pump, or pump obstruction causing drainage issues.
E3 Error Code (Frigidaire Washer Water Level Sensor Error)
Meaning: Frigidaire washer pressure sensor malfunction; incorrect water level detection, possibly caused by a faulty sensor or wiring issue.
E4 Error Code (Frigidaire Washer Door Lock Error)
Meaning: Frigidaire washer door not properly locked; malfunctioning door lock mechanism or faulty door switch preventing the wash cycle from starting.
E5 Error Code (Frigidaire Washer Lid Lock Error)
Meaning: Frigidaire washer lid lock malfunction; washer detects an open lid during operation, caused by a faulty lid lock or switch.
E6 Error Code (Frigidaire Washer Motor Error)
Meaning: Frigidaire washer motor issue; motor failure, overcurrent detection, or communication failure between the motor and control board.
E7 Error Code (Frigidaire Washer Unbalanced Load Error)
Meaning: Frigidaire washer detects an unbalanced load; improper load distribution, overloaded drum, or suspension system malfunction.
E8 Error Code (Frigidaire Washer Overflow Error)
Meaning: Frigidaire washer detects excessive water intake; faulty water level sensor or malfunctioning inlet valve causing overflow.
E9 Error Code (Frigidaire Washer Door Switch Error)
Meaning: Frigidaire washer door switch malfunction; door not detected as properly closed, preventing cycle operation.
F1 Error Code (Frigidaire Washer Control Board Error)
Meaning: Frigidaire washer main control board failure; communication issue or malfunction preventing proper washer operation.
F2 Error Code (Frigidaire Washer Pressure Switch Error)
Meaning: Frigidaire washer pressure switch failure; incorrect water level detection or faulty wiring preventing proper water flow.
F3 Error Code (Frigidaire Washer Temperature Sensor Error)
Meaning: Frigidaire washer temperature sensor malfunction; inaccurate water temperature readings or sensor wiring issue affecting cycle performance.
F4 Error Code (Frigidaire Washer Timer Error)
Meaning: Frigidaire washer timer malfunction; issue with the cycle timer, causing incorrect cycle progression or washing time.
F5 Error Code (Frigidaire Washer Voltage Error)
Meaning: Frigidaire washer voltage issue; power fluctuation, unstable voltage supply, or wiring issue affecting the washer's functionality.
F6 Error Code (Frigidaire Washer Spin Error)
Meaning: Frigidaire washer unable to spin; motor malfunction, wiring issue, or drive system failure preventing drum rotation.
F7 Error Code (Frigidaire Washer Door Lock Failure)
Meaning: Frigidaire washer door lock issue; failure in the door lock system, preventing the washer from running properly.
F8 Error Code (Frigidaire Washer High Spin Speed Error)
Meaning: Frigidaire washer over-spinning detected; issues with the spin motor, drive system, or control board causing excessive spin speeds.
F9 Error Code (Frigidaire Washer Suds Error)
Meaning: Frigidaire washer detects excessive suds; too much detergent or improper detergent use leading to excess foam.
F10 Error Code (Frigidaire Washer Communication Error)
Meaning: Frigidaire washer communication failure; control board or wiring issue disrupting communication between components.
F11 Error Code (Frigidaire Washer Drain Pump Error)
Meaning: Frigidaire washer drain pump malfunction; pump failure or blockage preventing proper drainage during wash or rinse cycles.

Frigidaire Dryer Error Codes

E1 Error Code (Frigidaire Dryer Control Board Error)
Meaning: Frigidaire dryer control board malfunction; communication issue between the control board and other components, preventing the dryer from operating.
E2 Error Code (Frigidaire Dryer Temperature Sensor Error)
Meaning: Frigidaire dryer temperature sensor malfunction; incorrect temperature readings, possibly due to a faulty thermistor or wiring issue.
E3 Error Code (Frigidaire Dryer Door Switch Error)
Meaning: Frigidaire dryer door switch malfunction; door not detected as properly closed, causing the dryer to fail to start or operate.
E4 Error Code (Frigidaire Dryer Heating Element Error)
Meaning: Frigidaire dryer heating element malfunction; failure of the heating element, preventing the dryer from generating sufficient heat for drying.
E5 Error Code (Frigidaire Dryer Motor Error)
Meaning: Frigidaire dryer motor issue; motor failure or overload, preventing the drum from spinning or operating properly.
E6 Error Code (Frigidaire Dryer Venting Issue)
Meaning: Frigidaire dryer airflow restriction detected; blocked vent, lint buildup, or an obstruction in the venting system causing poor airflow and drying performance.
E7 Error Code (Frigidaire Dryer Overheating Error)
Meaning: Frigidaire dryer overheating detected; excessive heat buildup due to a malfunctioning thermostat, temperature sensor, or blocked vent.
E8 Error Code (Frigidaire Dryer Power Failure)
Meaning: Frigidaire dryer power interruption; electrical surge or fluctuation causing the dryer to stop functioning or reset during operation.
E9 Error Code (Frigidaire Dryer Blower Motor Error)
Meaning: Frigidaire dryer blower motor failure; malfunctioning motor affecting airflow, which leads to poor drying efficiency or excessive drying time.
F1 Error Code (Frigidaire Dryer Communication Error)
Meaning: Frigidaire dryer control board communication failure; failure in communication between the dryer’s components, such as the motor or temperature sensors.
F2 Error Code (Frigidaire Dryer Control Lock Error)
Meaning: Frigidaire dryer control lock engaged; child lock feature activated, preventing any changes to settings or starting the cycle.
F3 Error Code (Frigidaire Dryer Low Voltage Error)
Meaning: Frigidaire dryer detects low voltage; electrical supply issue, improper voltage, or an issue with the dryer’s power source.
F4 Error Code (Frigidaire Dryer Drum Motor Speed Error)
Meaning: Frigidaire dryer drum motor failure; motor unable to reach the correct speed, possibly due to a motor overload, mechanical issue, or wiring fault.
F5 Error Code (Frigidaire Dryer Door Switch Error)
Meaning: Frigidaire dryer door switch issue; failure of the door switch to detect when the door is properly closed, preventing the dryer from starting.
F6 Error Code (Frigidaire Dryer Pressure Switch Error)
Meaning: Frigidaire dryer pressure switch malfunction; incorrect detection of the air pressure, causing the dryer to stop or fail to complete a cycle.
F7 Error Code (Frigidaire Dryer High Temperature Error)
Meaning: Frigidaire dryer high temperature detection; overheating issue, possibly caused by a faulty thermostat or temperature sensor.
F8 Error Code (Frigidaire Dryer Excessive Moisture Error)
Meaning: Frigidaire dryer detects excessive moisture; moisture sensor malfunction or improper drying conditions, requiring adjustment to drying settings or environment.
F9 Error Code (Frigidaire Dryer System Error)
Meaning: Frigidaire dryer system malfunction; internal error affecting the dryer’s ability to perform correctly, often due to control board or motor issues.
F10 Error Code (Frigidaire Dryer Drum Temperature Error)
Meaning: Frigidaire dryer drum temperature issue; failure of temperature sensors or improper heat regulation, preventing the dryer from maintaining the correct heat level.
F11 Error Code (Frigidaire Dryer Load Imbalance Error)
Meaning: Frigidaire dryer detects an unbalanced load; overloaded drum or improper load distribution causing the dryer to be unable to spin or dry effectively.

Frigidaire Oven Error Codes

F0 Error Code (Frigidaire Oven Keypad Error)
Meaning: Frigidaire oven keypad or touchpad malfunction; stuck buttons, unresponsive controls, or faulty wiring in the control panel.
F1 Error Code (Frigidaire Oven Control Board Error)
Meaning: Frigidaire oven main control board failure; communication issue between the control board and other oven components.
F2 Error Code (Frigidaire Oven Overheating Error)
Meaning: Frigidaire oven detects overheating; malfunctioning thermostat, temperature sensor, or control board causing excessive heat.
F3 Error Code (Frigidaire Oven Temperature Sensor Error)
Meaning: Frigidaire oven temperature sensor malfunction; incorrect temperature readings or faulty sensor wiring affecting oven performance.
F4 Error Code (Frigidaire Oven Shorted Sensor)
Meaning: Frigidaire oven temperature sensor circuit shorted; failure in the sensor or its wiring causing constant high-temperature readings.
F5 Error Code (Frigidaire Oven Relay Error)
Meaning: Frigidaire oven relay failure; relay switch malfunction preventing proper heating element or fan operation.
F6 Error Code (Frigidaire Oven Door Lock Error)
Meaning: Frigidaire oven door lock malfunction; failure in the self-clean door lock mechanism, preventing the oven from locking properly.
F7 Error Code (Frigidaire Oven Touchpad Error)
Meaning: Frigidaire oven touchpad malfunction; unresponsive buttons or faulty control panel affecting cycle selection or settings.
F8 Error Code (Frigidaire Oven Bake Element Error)
Meaning: Frigidaire oven bake element failure; problem with the heating element, causing improper heat distribution during the baking cycle.
F9 Error Code (Frigidaire Oven Door Open Error)
Meaning: Frigidaire oven detects the door is open during the self-clean cycle; door latch or sensor malfunction preventing operation.
F10 Error Code (Frigidaire Oven Cooling Fan Error)
Meaning: Frigidaire oven cooling fan malfunction; failure to cool the oven after use, potentially causing overheating or unsafe conditions.
F11 Error Code (Frigidaire Oven Communication Error)
Meaning: Frigidaire oven communication failure; control board not properly communicating with oven components such as heating elements or sensors.
F12 Error Code (Frigidaire Oven Thermistor Error)
Meaning: Frigidaire oven thermistor malfunction; faulty temperature sensor preventing accurate heat regulation during cooking.
F13 Error Code (Frigidaire Oven Self-Clean Lock Error)
Meaning: Frigidaire oven self-clean door lock malfunction; failure to lock the door securely during the self-clean cycle.
F14 Error Code (Frigidaire Oven Voltage Error)
Meaning: Frigidaire oven detects an issue with the power supply; voltage instability, power surge, or insufficient voltage affecting the oven’s control system.
F15 Error Code (Frigidaire Oven Door Switch Error)
Meaning: Frigidaire oven door switch failure; door not detected as securely closed, preventing the oven from starting or operating correctly.
F16 Error Code (Frigidaire Oven Igniter Error)
Meaning: Frigidaire oven gas igniter malfunction; failure to ignite the gas burner, preventing cooking or baking with the gas oven.
F17 Error Code (Frigidaire Oven Temperature Control Error)
Meaning: Frigidaire oven temperature regulation issue; malfunctioning thermostat or control board preventing proper temperature control.
F18 Error Code (Frigidaire Oven Relay Error)
Meaning: Frigidaire oven relay system malfunction; failure in relay switches causing issues with heating elements, oven fans, or other components.
F19 Error Code (Frigidaire Oven Self-Cleaning Error)
Meaning: Frigidaire oven self-clean cycle malfunction; failure to complete the self-cleaning process due to issues with temperature sensors, door locks, or control board.

Frigidaire Dishwasher Error Codes

F0 Error Code (Frigidaire Dishwasher Keypad Error)
Meaning: Frigidaire dishwasher keypad malfunction; unresponsive or stuck buttons on the control panel, potentially due to moisture or wiring issues.
F1 Error Code (Frigidaire Dishwasher Water Leak Error)
Meaning: Frigidaire dishwasher detects a leak; leaking water from the bottom or sides, possibly caused by a faulty door seal, hose, or internal component.
F2 Error Code (Frigidaire Dishwasher Drainage Error)
Meaning: Frigidaire dishwasher unable to drain; clogged drain hose, faulty pump, or blocked filter causing water drainage issues.
F3 Error Code (Frigidaire Dishwasher Overfill Error)
Meaning: Frigidaire dishwasher detects an overfill; excessive water intake, likely caused by a malfunctioning water inlet valve or float switch.
F4 Error Code (Frigidaire Dishwasher Door Switch Error)
Meaning: Frigidaire dishwasher door switch malfunction; failure to detect whether the door is properly closed, preventing cycle start.
F5 Error Code (Frigidaire Dishwasher Heating Error)
Meaning: Frigidaire dishwasher heating element failure; improper heating during the wash or dry cycles due to a faulty heating element or thermistor.
F6 Error Code (Frigidaire Dishwasher Motor Error)
Meaning: Frigidaire dishwasher motor malfunction; failure to circulate water, causing poor cleaning performance or an incomplete cycle.
F7 Error Code (Frigidaire Dishwasher Thermal Sensor Error)
Meaning: Frigidaire dishwasher temperature sensor failure; incorrect water temperature readings, causing improper washing or drying results.
F8 Error Code (Frigidaire Dishwasher Vent Error)
Meaning: Frigidaire dishwasher vent malfunction; blocked or faulty vent preventing proper air circulation during drying cycles.
F9 Error Code (Frigidaire Dishwasher Drain Pump Error)
Meaning: Frigidaire dishwasher drain pump failure; obstruction, damage, or malfunction in the pump, preventing water from draining properly.
F10 Error Code (Frigidaire Dishwasher Communication Error)
Meaning: Frigidaire dishwasher control board communication failure; issues with the control panel or wiring preventing communication with other components.
F11 Error Code (Frigidaire Dishwasher Control Board Error)
Meaning: Frigidaire dishwasher main control board failure; malfunction or failure of the control board, preventing the dishwasher from completing cycles.
F12 Error Code (Frigidaire Dishwasher Wash Motor Error)
Meaning: Frigidaire dishwasher wash motor malfunction; motor failure or obstruction preventing water circulation during wash cycles.
F13 Error Code (Frigidaire Dishwasher Thermal Cutoff Error)
Meaning: Frigidaire dishwasher thermal cutoff failure; overheating issue, causing the safety thermal cut-off to engage and shut down the dishwasher.
F14 Error Code (Frigidaire Dishwasher Water Temperature Error)
Meaning: Frigidaire dishwasher detects an incorrect water temperature; malfunctioning thermostat or thermistor affecting proper washing and drying performance.
F15 Error Code (Frigidaire Dishwasher Pressure Switch Error)
Meaning: Frigidaire dishwasher pressure switch malfunction; incorrect water level detection, affecting water flow or drainage during cycles.
F16 Error Code (Frigidaire Dishwasher Drain Hose Error)
Meaning: Frigidaire dishwasher drain hose blockage or kink; improper drainage caused by a hose obstruction, preventing the dishwasher from draining properly.
F17 Error Code (Frigidaire Dishwasher Overflow Error)
Meaning: Frigidaire dishwasher overflow detection; issue with the float switch, inlet valve, or drain pump causing excess water to flow into the dishwasher.
F18 Error Code (Frigidaire Dishwasher Wash Cycle Error)
Meaning: Frigidaire dishwasher wash cycle interruption; failure of the wash motor, pump, or heater, preventing the completion of the washing process.
F19 Error Code (Frigidaire Dishwasher Drying Error)
Meaning: Frigidaire dishwasher drying cycle failure; problem with the heating element, thermostat, or venting system affecting the drying phase.

Frigidaire Microwave Error Codes

F0 Error Code (Frigidaire Microwave Keypad Error)
Meaning: Frigidaire microwave keypad malfunction; unresponsive or stuck buttons, potentially caused by moisture or wiring issues in the control panel.
F1 Error Code (Frigidaire Microwave Control Board Error)
Meaning: Frigidaire microwave control board failure; communication issue or malfunction in the main control board affecting microwave operation.
F2 Error Code (Frigidaire Microwave Door Switch Error)
Meaning: Frigidaire microwave door switch failure; failure to detect if the microwave door is properly closed, preventing the microwave from starting.
F3 Error Code (Frigidaire Microwave Temperature Sensor Error)
Meaning: Frigidaire microwave temperature sensor malfunction; faulty temperature sensor causing the microwave to overheat or not heat properly.
F4 Error Code (Frigidaire Microwave Magnetron Error)
Meaning: Frigidaire microwave magnetron failure; magnetron not functioning, causing the microwave to not generate heat or cook food properly.
F5 Error Code (Frigidaire Microwave Relay Error)
Meaning: Frigidaire microwave relay malfunction; a stuck or faulty relay preventing the microwave from starting or operating correctly.
F6 Error Code (Frigidaire Microwave Humidity Sensor Error)
Meaning: Frigidaire microwave humidity sensor failure; faulty sensor causing the microwave to miscalculate cooking time, especially in auto cook functions.
F7 Error Code (Frigidaire Microwave Communication Error)
Meaning: Frigidaire microwave communication failure; control board and other components fail to communicate, disrupting microwave operation.
F8 Error Code (Frigidaire Microwave Motor Error)
Meaning: Frigidaire microwave motor failure; malfunctioning turntable motor or fan motor affecting the microwave's performance.
F9 Error Code (Frigidaire Microwave Short Circuit Error)
Meaning: Frigidaire microwave short circuit detected; an electrical short or fault in the microwave’s internal components, causing it to stop working.
F10 Error Code (Frigidaire Microwave Power Supply Error)
Meaning: Frigidaire microwave power supply issue; electrical problems, such as power surges or a blown fuse, interrupting the microwave's operation.
F11 Error Code (Frigidaire Microwave Overheating Error)
Meaning: Frigidaire microwave detects overheating; failure of the cooling fan or blocked vents causing the microwave to overheat and shut down.
F12 Error Code (Frigidaire Microwave Fuse Error)
Meaning: Frigidaire microwave fuse blown; a blown fuse caused by electrical surges, overheating, or malfunctioning components.
F13 Error Code (Frigidaire Microwave Touchpad Error)
Meaning: Frigidaire microwave touchpad malfunction; failure of the touchpad or keypad, making it unresponsive or preventing setting changes.
F14 Error Code (Frigidaire Microwave Timer Error)
Meaning: Frigidaire microwave timer malfunction; incorrect cook times or failure to set the timer, caused by a defective timer circuit.
F15 Error Code (Frigidaire Microwave Cooling Fan Error)
Meaning: Frigidaire microwave cooling fan failure; cooling fan not operating, leading to overheating and possible damage to internal components.
F16 Error Code (Frigidaire Microwave Door Lock Error)
Meaning: Frigidaire microwave door lock failure; issue with the door latch or switch preventing the microwave from starting or operating.
F17 Error Code (Frigidaire Microwave Internal Short Circuit)
Meaning: Frigidaire microwave detects an internal short circuit; typically caused by damaged wiring or a faulty component, leading to operational failure.
F18 Error Code (Frigidaire Microwave Motor Relay Error)
Meaning: Frigidaire microwave motor relay failure; malfunction preventing the motor from operating, which can affect the turntable or fan.
F19 Error Code (Frigidaire Microwave Overcurrent Error)
Meaning: Frigidaire microwave detects an overcurrent; electrical overload in the microwave, often due to a malfunctioning component or power surge.

Amana Refrigerator Error Codes

E1 Error Code (Amana Refrigerator Temperature Sensor Error)
Meaning: Amana refrigerator temperature sensor malfunction; inaccurate temperature readings due to a faulty thermistor or sensor wiring.
E2 Error Code (Amana Refrigerator Evaporator Fan Error)
Meaning: Evaporator fan motor failure; improper air circulation leading to uneven cooling in the fridge or freezer compartments.
E3 Error Code (Amana Refrigerator Defrost Sensor Error)
Meaning: Defrost sensor or thermostat malfunction; failure in the defrost cycle causing frost buildup and inadequate cooling.
E4 Error Code (Amana Refrigerator Defrost Heater Error)
Meaning: Defrost heater failure; malfunctioning heating element preventing proper defrosting and leading to frost accumulation.
E5 Error Code (Amana Refrigerator Ice Maker Error)
Meaning: Ice maker malfunction; issues with water supply, ice tray motor, or frozen water lines preventing ice production.
E6 Error Code (Amana Refrigerator Damper Control Error)
Meaning: Damper control failure; improper airflow between the refrigerator and freezer sections, causing temperature imbalances.
E7 Error Code (Amana Refrigerator Condenser Fan Error)
Meaning: Condenser fan motor malfunction; fan not operating properly, causing the refrigerator to overheat and reduce cooling efficiency.
E8 Error Code (Amana Refrigerator Water Inlet Valve Error)
Meaning: Water inlet valve failure; restricted or blocked water flow to the ice maker or water dispenser.
E9 Error Code (Amana Refrigerator High Temperature Error)
Meaning: High internal temperature detected; possible cooling system failure due to a compressor issue, refrigerant leak, or blocked airflow.
F1 Error Code (Amana Refrigerator Main Control Board Error)
Meaning: Control board malfunction; communication failure between the control board and other refrigerator components.
F2 Error Code (Amana Refrigerator Freezer Temperature Error)
Meaning: Freezer temperature sensor malfunction; incorrect readings causing overcooling or insufficient freezing.
F3 Error Code (Amana Refrigerator Ice Dispenser Error)
Meaning: Ice dispenser motor failure; jammed ice chute, faulty motor, or electrical issue preventing ice dispensing.
F4 Error Code (Amana Refrigerator Door Switch Error)
Meaning: Door switch malfunction; refrigerator detects the door as open when closed, impacting cooling and interior lighting.
F5 Error Code (Amana Refrigerator Flow Meter Error)
Meaning: Flow meter failure; inaccurate water flow measurements affecting the water dispenser or ice maker operation.
F6 Error Code (Amana Refrigerator Water Filter Error)
Meaning: Water filter issue; clogged or improperly installed filter reducing water flow to the dispenser or ice maker.
F7 Error Code (Amana Refrigerator Defrost Circuit Error)
Meaning: Defrost circuit malfunction; failure in the defrost heater, timer, or thermostat leading to frost buildup.
F8 Error Code (Amana Refrigerator Compressor Error)
Meaning: Compressor malfunction; cooling system failure due to a non-functional compressor or refrigerant issues.
F9 Error Code (Amana Refrigerator Refrigeration System Error)
Meaning: Refrigeration system malfunction; potential refrigerant leak, clogged system, or compressor problem affecting cooling performance.
F10 Error Code (Amana Refrigerator Water Leak Error)
Meaning: Water leakage detected; possible leak from water lines, ice maker, or a clogged defrost drain.
F11 Error Code (Amana Refrigerator Communication Error)
Meaning: Communication failure between the control board and refrigerator components, affecting proper operation.

Amana Washer Error Codes

F1 Error Code (Amana Washer Main Control Board Error)
Meaning: Amana washer main control board failure; communication issue between the control board and other washer components, affecting cycle operation.
F2 Error Code (Amana Washer Water Inlet Error)
Meaning: Water supply issue; washer not filling with water due to a clogged inlet valve, low water pressure, or obstructed water hose.
F3 Error Code (Amana Washer Drainage Error)
Meaning: Washer unable to drain water; clogged drain hose, blocked pump, or faulty drain pump causing water retention.
F4 Error Code (Amana Washer Water Level Sensor Error)
Meaning: Water level sensor malfunction; incorrect water level detection due to a faulty pressure switch or wiring issue.
F5 Error Code (Amana Washer Door Lock Error)
Meaning: Washer door not locking or unlocking; malfunction in the door lock mechanism or door switch preventing the cycle from starting.
F6 Error Code (Amana Washer Motor Error)
Meaning: Motor malfunction; washer motor failure, overloading, or communication error between the motor and control board.
F7 Error Code (Amana Washer Unbalanced Load Error)
Meaning: Washer detects an unbalanced load; uneven load distribution, overloaded drum, or suspension system failure affecting spin cycles.
F8 Error Code (Amana Washer Overflow Error)
Meaning: Excessive water detected; possible faulty inlet valve, water level sensor issue, or pressure switch malfunction causing overfilling.
F9 Error Code (Amana Washer Spin Cycle Error)
Meaning: Washer unable to complete the spin cycle; motor speed issue, drum obstruction, or excessive suds preventing proper spinning.
F10 Error Code (Amana Washer Suds Error)
Meaning: Excessive suds detected; too much detergent or improper detergent type causing foam buildup and disrupting cycle performance.
F11 Error Code (Amana Washer Temperature Sensor Error)
Meaning: Temperature sensor malfunction; faulty thermistor causing incorrect water temperature readings during cycles.
F12 Error Code (Amana Washer Pressure Switch Error)
Meaning: Pressure switch failure; washer unable to detect proper water levels due to a malfunctioning pressure sensor or wiring issue.
F13 Error Code (Amana Washer Drive Motor Error)
Meaning: Drive motor malfunction; motor overload, drive belt issue, or failure in the drive system preventing drum movement.
F14 Error Code (Amana Washer Lid Lock Error)
Meaning: Lid not locking properly; washer unable to detect a locked lid due to a faulty lid switch or latch mechanism.
F15 Error Code (Amana Washer Control Panel Error)
Meaning: Control panel malfunction; touchpad buttons unresponsive or wiring failure preventing proper cycle selection.
F16 Error Code (Amana Washer Overheating Error)
Meaning: Overheating detected; motor or heating element overheating due to overloading or a sensor failure.
F17 Error Code (Amana Washer Communication Error)
Meaning: Communication failure between the main control board and other washer components, disrupting proper operation.
F18 Error Code (Amana Washer Drain Pump Error)
Meaning: Drain pump failure; pump not functioning due to blockages, wiring faults, or motor issues.
F19 Error Code (Amana Washer Leak Detection Error)
Meaning: Water leak detected; potential leaks from hoses, pump, or drum, triggering safety mechanisms to prevent operation.
F20 Error Code (Amana Washer Voltage Error)
Meaning: Voltage supply issue; improper or unstable power supply causing interruptions in washer operation.

Amana Dryer Error Codes

F1 Error Code (Amana Dryer Control Board Error)
Meaning: Amana dryer main control board malfunction; communication issue or failure in the control board disrupting dryer operation.
F2 Error Code (Amana Dryer Thermistor Error)
Meaning: Thermistor malfunction; faulty temperature sensor causing incorrect temperature readings or overheating during cycles.
F3 Error Code (Amana Dryer Door Switch Error)
Meaning: Door switch failure; dryer detects the door as open even when it’s closed, preventing the cycle from starting.
F4 Error Code (Amana Dryer Heating Element Error)
Meaning: Heating element malfunction; failure to generate heat due to a damaged element, wiring issue, or thermal fuse problem.
F5 Error Code (Amana Dryer Moisture Sensor Error)
Meaning: Moisture sensor failure; incorrect readings causing cycles to end prematurely or extend unnecessarily.
F6 Error Code (Amana Dryer Motor Error)
Meaning: Motor malfunction; drive motor not running due to overload, mechanical fault, or communication issue with the control board.
F7 Error Code (Amana Dryer Overheating Error)
Meaning: Overheating detected; restricted airflow, faulty thermostat, or blocked vents causing the dryer to overheat.
F8 Error Code (Amana Dryer Airflow Restriction)
Meaning: Restricted airflow detected; clogged lint filter, blocked exhaust vent, or blower motor failure affecting drying performance.
F9 Error Code (Amana Dryer Long Drying Time)
Meaning: Extended drying time detected; venting issues, moisture sensor malfunction, or low heat output preventing efficient drying.
AF Error Code (Amana Dryer Airflow Blockage)
Meaning: Airflow blockage in the venting system; lint buildup, hose obstruction, or improper installation affecting dryer efficiency.
PF Error Code (Amana Dryer Power Failure)
Meaning: Power interruption during the cycle; caused by voltage fluctuations, power surges, or an unstable electrical supply.
L2 Error Code (Amana Dryer Low Voltage)
Meaning: Low voltage supply detected; insufficient power reaching the dryer, possibly due to wiring issues or an improper power source.
E1 Error Code (Amana Dryer Thermal Fuse Error)
Meaning: Thermal fuse failure; blown fuse due to overheating or restricted airflow, causing the dryer to stop heating.
E2 Error Code (Amana Dryer Drum Motor Error)
Meaning: Drum motor failure; motor unable to turn the drum due to mechanical issues, belt problems, or motor overload.
E3 Error Code (Amana Dryer Control Panel Error)
Meaning: Control panel malfunction; touchpad or buttons unresponsive due to faulty wiring or damaged control board.
F10 Error Code (Amana Dryer High Heat Error)
Meaning: Excessive heat detected; thermostat, heating element, or temperature sensor malfunction causing unsafe heat levels.
LOC Error Code (Amana Dryer Control Lock Activated)
Meaning: Control lock feature engaged; buttons and settings disabled to prevent accidental operation, often a child safety feature.
E4 Error Code (Amana Dryer Blower Motor Error)
Meaning: Blower motor failure; motor not circulating air properly, leading to poor drying and potential overheating.
E5 Error Code (Amana Dryer Start Switch Error)
Meaning: Start switch malfunction; dryer unable to start due to a defective or stuck start button.
E6 Error Code (Amana Dryer Igniter Error - Gas Models)
Meaning: Gas dryer igniter failure; faulty igniter preventing the gas burner from lighting, causing the dryer to not produce heat.

Amana Oven Error Codes

F1 Error Code (Amana Oven Control Board Error)
Meaning: Amana oven control board failure; communication issue between the control board and oven components disrupting proper operation.
F2 Error Code (Amana Oven Overheating Error)
Meaning: Amana oven detects overheating; faulty thermostat, temperature sensor, or control board causing excessive heat.
F3 Error Code (Amana Oven Temperature Sensor Error)
Meaning: Amana oven temperature sensor malfunction; inaccurate temperature readings or faulty wiring causing improper heat regulation.
F4 Error Code (Amana Oven Shorted Sensor Error)
Meaning: Amana oven temperature sensor circuit shorted; sensor failure or damaged wiring resulting in constant high-temperature readings.
F5 Error Code (Amana Oven Door Lock Error)
Meaning: Amana oven door lock malfunction; self-clean door lock mechanism not engaging or releasing properly.
F6 Error Code (Amana Oven Communication Error)
Meaning: Amana oven control board communication failure; data transfer issues between the control board and other oven components.
F7 Error Code (Amana Oven Touchpad Error)
Meaning: Amana oven touchpad malfunction; stuck or unresponsive buttons preventing proper operation.
F8 Error Code (Amana Oven Cooling Fan Error)
Meaning: Cooling fan malfunction; motor failure or obstruction preventing the fan from cooling the oven during or after use.
F9 Error Code (Amana Oven Door Open Error)
Meaning: Amana oven detects the door is open during a self-clean cycle; door latch or sensor failure preventing the cycle from starting.
F10 Error Code (Amana Oven Bake Element Error)
Meaning: Bake element failure; heating element not functioning, leading to uneven or insufficient baking performance.
F11 Error Code (Amana Oven Broil Element Error)
Meaning: Broil element failure; faulty heating element or wiring issue causing the broil function to not heat properly.
F12 Error Code (Amana Oven Voltage Error)
Meaning: Voltage issue detected; improper or unstable power supply affecting oven performance.
F13 Error Code (Amana Oven Thermistor Error)
Meaning: Thermistor failure; temperature sensor malfunction causing incorrect temperature control.
F14 Error Code (Amana Oven Relay Error)
Meaning: Relay board malfunction; failure to properly control heating elements or other components.
F15 Error Code (Amana Oven Timer Error)
Meaning: Timer circuit malfunction; failure in the timer system preventing proper cycle timing or delayed start functions.
F16 Error Code (Amana Oven Igniter Error)
Meaning: Gas oven igniter failure; igniter not lighting the gas burner properly, preventing the oven from heating.
F17 Error Code (Amana Oven Door Switch Error)
Meaning: Door switch malfunction; oven detects the door as open even when closed, disrupting operation.
F18 Error Code (Amana Oven Self-Clean Error)
Meaning: Self-clean cycle malfunction; failure in temperature sensors or door lock system preventing the self-clean cycle.
F19 Error Code (Amana Oven High Heat Error)
Meaning: Excessive heat detected; thermostat or control board malfunction causing unsafe temperatures during cooking or cleaning.
LOC Error Code (Amana Oven Control Lock Activated)
Meaning: Control lock feature enabled; oven buttons and settings locked to prevent accidental changes, often used as a child safety feature.

Amana Dishwasher Error Codes

F1 Error Code (Amana Dishwasher Water Leak Error)
Meaning: Amana dishwasher detects a water leak; possible causes include leaking hoses, a damaged pump, or a faulty door seal.
F2 Error Code (Amana Dishwasher Drainage Error)
Meaning: Amana dishwasher unable to drain water; potential clog in the drain hose, faulty drain pump, or a blocked filter.
F3 Error Code (Amana Dishwasher Overfill Error)
Meaning: Amana dishwasher detects excessive water; caused by a malfunctioning water inlet valve, pressure switch, or float switch.
F4 Error Code (Amana Dishwasher Heating Error)
Meaning: Amana dishwasher heating element malfunction; failure to heat water due to a damaged heating element or thermostat.
F5 Error Code (Amana Dishwasher Door Switch Error)
Meaning: Amana dishwasher door switch failure; dishwasher detects the door as open even when closed, preventing operation.
F6 Error Code (Amana Dishwasher Water Inlet Error)
Meaning: Amana dishwasher not filling with water; possible issues with the water inlet valve, low water pressure, or a clogged water line.
F7 Error Code (Amana Dishwasher Motor Error)
Meaning: Wash motor malfunction; failure of the motor to circulate water, caused by motor damage or electrical wiring issues.
F8 Error Code (Amana Dishwasher Spray Arm Error)
Meaning: Amana dishwasher spray arm not functioning; obstruction or improper installation preventing proper water distribution.
F9 Error Code (Amana Dishwasher Float Switch Error)
Meaning: Float switch malfunction; incorrect detection of water level due to a faulty switch or debris blocking the float mechanism.
F10 Error Code (Amana Dishwasher Temperature Sensor Error)
Meaning: Temperature sensor failure; incorrect water temperature readings caused by a malfunctioning thermistor.
F11 Error Code (Amana Dishwasher Control Board Error)
Meaning: Main control board malfunction; failure in communication between the control board and other components disrupting operation.
F12 Error Code (Amana Dishwasher Drying Error)
Meaning: Drying system failure; heating element or venting system malfunction preventing proper drying of dishes.
F13 Error Code (Amana Dishwasher Water Pressure Error)
Meaning: Low or high water pressure detected; potentially caused by a clogged inlet valve, blocked filters, or an issue with the water supply.
F14 Error Code (Amana Dishwasher Drain Pump Error)
Meaning: Drain pump failure; pump motor malfunction or blockage preventing water from draining properly.
F15 Error Code (Amana Dishwasher Wash Cycle Error)
Meaning: Wash cycle interruption; issues with the motor, control board, or sensors causing incomplete washing cycles.
F16 Error Code (Amana Dishwasher Vent Error)
Meaning: Venting system failure; blockage or damaged vent preventing steam release during the drying phase.
F17 Error Code (Amana Dishwasher Communication Error)
Meaning: Communication failure between the main control board and other components; caused by wiring faults or board issues.
F18 Error Code (Amana Dishwasher Energy Efficiency Error)
Meaning: Amana dishwasher not operating efficiently; sensors detecting prolonged cycles or energy consumption due to faulty components.
F19 Error Code (Amana Dishwasher Water Circulation Error)
Meaning: Water circulation issue; wash motor or spray arm failure causing improper cleaning performance.
LOC Error Code (Amana Dishwasher Control Lock Activated)
Meaning: Control lock feature enabled; prevents accidental operation or button changes, often used as a child safety feature.

Amana Microwave Error Codes

F1 Error Code (Amana Microwave Control Board Error)
Meaning: Amana microwave control board malfunction; failure in communication between the control board and other components affecting operation.
F2 Error Code (Amana Microwave Temperature Sensor Error)
Meaning: Temperature sensor malfunction; faulty readings causing overheating or improper cooking performance.
F3 Error Code (Amana Microwave Door Switch Error)
Meaning: Door switch failure; the microwave detects the door as open even when closed, preventing operation.
F4 Error Code (Amana Microwave Magnetron Error)
Meaning: Magnetron failure; inability to generate heat due to a faulty magnetron or wiring issue.
F5 Error Code (Amana Microwave Touchpad Error)
Meaning: Touchpad malfunction; stuck or unresponsive buttons preventing proper control of cooking functions.
F6 Error Code (Amana Microwave Humidity Sensor Error)
Meaning: Humidity sensor malfunction; failure to detect moisture levels correctly, leading to incorrect cooking times or settings.
F7 Error Code (Amana Microwave Relay Error)
Meaning: Relay board malfunction; a stuck or defective relay preventing the microwave from starting or heating properly.
F8 Error Code (Amana Microwave Cooling Fan Error)
Meaning: Cooling fan failure; motor malfunction or obstruction preventing the microwave from cooling down after use.
F9 Error Code (Amana Microwave Short Circuit Error)
Meaning: Electrical short detected; caused by faulty wiring or damaged internal components, resulting in a system shutdown.
F10 Error Code (Amana Microwave Power Supply Error)
Meaning: Power supply issue; voltage irregularity or power surge causing the microwave to reset or fail to operate.
F11 Error Code (Amana Microwave Overheating Error)
Meaning: Overheating detected; caused by blocked vents, a failed cooling system, or a faulty temperature sensor.
F12 Error Code (Amana Microwave Fuse Error)
Meaning: Internal fuse blown; power surge, overheating, or electrical fault causing the microwave to shut down.
F13 Error Code (Amana Microwave Timer Error)
Meaning: Timer malfunction; failure in the timer circuit resulting in incorrect or failed countdown during cooking cycles.
F14 Error Code (Amana Microwave Motor Error)
Meaning: Motor failure; turntable or fan motor malfunction, preventing rotation or proper airflow inside the microwave.
F15 Error Code (Amana Microwave Magnetron Temperature Error)
Meaning: Magnetron overheating; safety mechanisms engaged due to excessive heat from a faulty magnetron or blocked cooling vents.
F16 Error Code (Amana Microwave Door Lock Error)
Meaning: Door lock failure; microwave unable to secure the door for safe operation due to a faulty latch or sensor.
F17 Error Code (Amana Microwave Communication Error)
Meaning: Communication failure between control board and other components, disrupting microwave functions.
F18 Error Code (Amana Microwave Touchpad Circuit Error)
Meaning: Touchpad circuit failure; internal wiring issue preventing button inputs from being registered.
F19 Error Code (Amana Microwave Overcurrent Error)
Meaning: Electrical overload detected; power surge or faulty components drawing excessive current, causing shutdown.
LOC Error Code (Amana Microwave Control Lock Activated)
Meaning: Control lock feature enabled; prevents accidental button presses or operation, often a child safety feature.

Bosch Refrigerator Error Codes

E01 Error Code (Bosch Refrigerator Temperature Sensor Error)
Meaning: Temperature sensor malfunction; faulty sensor or wiring causing inaccurate fridge or freezer temperature readings.
E02 Error Code (Bosch Refrigerator Evaporator Fan Error)
Meaning: Evaporator fan motor failure; air circulation issue leading to uneven cooling or frost buildup.
E03 Error Code (Bosch Refrigerator Defrost Heater Error)
Meaning: Defrost heater malfunction; heating element failure during defrost cycles, causing frost accumulation.
E04 Error Code (Bosch Refrigerator Condenser Fan Error)
Meaning: Condenser fan malfunction; fan motor failure, blockage, or wiring issue causing reduced cooling performance.
E05 Error Code (Bosch Refrigerator Compressor Error)
Meaning: Compressor failure; cooling system issue due to a malfunctioning compressor, relay, or refrigerant leak.
E06 Error Code (Bosch Refrigerator Damper Control Error)
Meaning: Damper control malfunction; airflow regulation issue between the fridge and freezer compartments, leading to uneven temperatures.
E07 Error Code (Bosch Refrigerator Ice Maker Error)
Meaning: Ice maker failure; jammed ice tray, faulty motor, or water supply issue preventing ice production.
E08 Error Code (Bosch Refrigerator Water Inlet Valve Error)
Meaning: Water inlet valve malfunction; water flow restricted to the ice maker or water dispenser due to a clogged or faulty valve.
E09 Error Code (Bosch Refrigerator High Temperature Error)
Meaning: High internal temperature detected; cooling system failure, door left open, or compressor issue.
E10 Error Code (Bosch Refrigerator Door Switch Error)
Meaning: Door switch failure; fridge detects the door as open when it is closed, disrupting cooling or triggering alarms.
E11 Error Code (Bosch Refrigerator Freezer Temperature Sensor Error)
Meaning: Freezer temperature sensor malfunction; faulty thermistor causing incorrect freezer temperature readings.
E12 Error Code (Bosch Refrigerator Defrost Timer Error)
Meaning: Defrost timer malfunction; failure to initiate or terminate defrost cycles, leading to frost buildup.
E13 Error Code (Bosch Refrigerator Water Filter Error)
Meaning: Water filter issue; clogged or improperly installed filter affecting water flow to the dispenser or ice maker.
E14 Error Code (Bosch Refrigerator Communication Error)
Meaning: Communication failure between the main control board and other components, causing operational disruptions.
E15 Error Code (Bosch Refrigerator Ice Dispenser Error)
Meaning: Ice dispenser malfunction; motor failure or blockage preventing ice dispensing.
E16 Error Code (Bosch Refrigerator Refrigeration System Error)
Meaning: Refrigeration system malfunction; potential refrigerant leak or blockages affecting cooling performance.
E17 Error Code (Bosch Refrigerator Fan Motor Error)
Meaning: Internal fan motor failure; reduced airflow leading to uneven cooling or freezer performance.
E18 Error Code (Bosch Refrigerator Power Supply Error)
Meaning: Voltage fluctuation or power surge affecting the refrigerator’s performance or causing resets.
E19 Error Code (Bosch Refrigerator Water Leak Error)
Meaning: Water leakage detected; internal or external leaks from water lines, ice maker, or clogged drain.
E20 Error Code (Bosch Refrigerator High Energy Consumption)
Meaning: Excessive energy usage detected; inefficiencies in the cooling system, often due to dirty condenser coils or poor insulation.

Bosch Washer Error Codes

E01 Error Code (Bosch Washer Door Lock Error)
Meaning: Bosch washer door not locking or unlocking; faulty door latch, door switch, or wiring preventing cycle operation.
E02 Error Code (Bosch Washer Water Inlet Error)
Meaning: Water supply issue; Bosch washer not filling with water due to a clogged inlet valve, low water pressure, or blocked hose.
E03 Error Code (Bosch Washer Drainage Error)
Meaning: Drain pump malfunction; water not draining properly due to a clogged drain hose, blocked pump, or pump motor failure.
E04 Error Code (Bosch Washer Water Level Sensor Error)
Meaning: Pressure sensor malfunction; incorrect water level detection caused by a faulty sensor or wiring issue.
E05 Error Code (Bosch Washer Water Temperature Sensor Error)
Meaning: Temperature sensor failure; inaccurate water temperature readings affecting cycle performance.
E06 Error Code (Bosch Washer Motor Error)
Meaning: Motor malfunction; drive motor failure, motor overload, or communication error between the motor and control board.
E07 Error Code (Bosch Washer Unbalanced Load Error)
Meaning: Unbalanced load detected; uneven distribution of clothes in the drum or suspension system issue preventing proper spin.
E08 Error Code (Bosch Washer Spin Cycle Error)
Meaning: Washer unable to complete the spin cycle; excessive suds, motor issue, or drum imbalance affecting rotation.
E09 Error Code (Bosch Washer Heating Element Error)
Meaning: Heating element failure; water not heating properly during the cycle due to a faulty element or wiring issue.
E10 Error Code (Bosch Washer Suds Error)
Meaning: Excessive suds detected; too much detergent or improper detergent type causing foam buildup and disrupting cycles.
E11 Error Code (Bosch Washer Drain Pump Blockage)
Meaning: Drain pump obstructed; debris or foreign objects blocking the pump, preventing proper drainage.
E12 Error Code (Bosch Washer Overfill Error)
Meaning: Excessive water detected in the drum; faulty water inlet valve, pressure sensor, or float switch causing overfilling.
E13 Error Code (Bosch Washer Communication Error)
Meaning: Communication failure between control board and other components; wiring or control board issue disrupting operation.
E14 Error Code (Bosch Washer Door Switch Error)
Meaning: Door switch malfunction; washer unable to detect a closed door, preventing the cycle from starting.
E15 Error Code (Bosch Washer Control Board Error)
Meaning: Main control board failure; software or hardware malfunction affecting the washer's operation.
E16 Error Code (Bosch Washer Leak Detection Error)
Meaning: Water leak detected; internal or external leaks from hoses, pump, or drum triggering safety mechanisms.
E17 Error Code (Bosch Washer Voltage Error)
Meaning: Voltage supply issue; low or fluctuating voltage affecting washer performance or causing resets.
E18 Error Code (Bosch Washer Overheating Error)
Meaning: Motor or heating element overheating; caused by overloading, faulty sensors, or prolonged operation.
E19 Error Code (Bosch Washer Load Sensor Error)
Meaning: Load sensor malfunction; incorrect detection of load size leading to improper water or energy use.
E20 Error Code (Bosch Washer Pressure Switch Error)
Meaning: Pressure switch failure; washer unable to detect proper water levels due to a faulty switch or wiring problem.

Bosch Dryer Error Codes

E01 Error Code (Bosch Dryer Control Board Error)
Meaning: Bosch dryer control board failure; communication issue or malfunction in the control board, affecting dryer functions.
E02 Error Code (Bosch Dryer Temperature Sensor Error)
Meaning: Temperature sensor malfunction; inaccurate temperature readings due to a faulty sensor or wiring problem.
E03 Error Code (Bosch Dryer Door Switch Error)
Meaning: Door switch failure; dryer unable to detect the door as closed, preventing operation.
E04 Error Code (Bosch Dryer Heating Element Error)
Meaning: Heating element failure; dryer not producing heat due to a malfunctioning element or wiring issue.
E05 Error Code (Bosch Dryer Moisture Sensor Error)
Meaning: Moisture sensor failure; inaccurate moisture readings causing the dryer to stop prematurely or run too long.
E06 Error Code (Bosch Dryer Motor Error)
Meaning: Motor malfunction; drive motor failure, overload, or communication issue preventing proper drum rotation.
E07 Error Code (Bosch Dryer Overheating Error)
Meaning: Bosch dryer overheating detected; excessive temperature caused by a blocked vent, malfunctioning thermostat, or other issues.
E08 Error Code (Bosch Dryer Airflow Error)
Meaning: Airflow restriction; clogged lint filter, blocked vent, or obstructed blower causing inefficient drying and overheating.
E09 Error Code (Bosch Dryer Vent Blockage Error)
Meaning: Vent system blocked; restricted airflow due to a blocked exhaust vent, causing longer drying times or overheating.
E10 Error Code (Bosch Dryer Voltage Error)
Meaning: Voltage issue detected; improper or fluctuating voltage supply affecting the dryer’s operation.
E11 Error Code (Bosch Dryer Thermal Fuse Error)
Meaning: Thermal fuse blown; caused by overheating or restricted airflow, preventing the dryer from heating.
E12 Error Code (Bosch Dryer Drum Motor Speed Error)
Meaning: Drum motor failure; inability to rotate the drum at the proper speed due to a motor issue or obstruction.
E13 Error Code (Bosch Dryer Control Panel Error)
Meaning: Control panel malfunction; failure in the user interface, preventing proper cycle selection or adjustments.
E14 Error Code (Bosch Dryer Low Voltage Error)
Meaning: Insufficient voltage detected; unstable or low voltage supply, causing the dryer to fail to start or run properly.
E15 Error Code (Bosch Dryer Circuit Error)
Meaning: Circuit malfunction; issue with the electrical system or wiring causing operational failure.
E16 Error Code (Bosch Dryer Airflow Sensor Error)
Meaning: Airflow sensor failure; incorrect detection of airflow, causing improper drying times or drying cycle disruption.
E17 Error Code (Bosch Dryer Door Lock Error)
Meaning: Door lock malfunction; failure to secure the door properly, preventing the dryer from starting or operating.
E18 Error Code (Bosch Dryer Start Switch Error)
Meaning: Start switch failure; dryer not starting due to a malfunctioning or stuck start switch.
E19 Error Code (Bosch Dryer Heating Circuit Error)
Meaning: Heating circuit malfunction; failure in the electrical connections, causing no heat production or inconsistent drying.
E20 Error Code (Bosch Dryer Sensor Error)
Meaning: Sensor failure; malfunction in the dryer’s moisture, temperature, or airflow sensor causing incorrect cycle operation.

Bosch Dishwasher Error Codes

E01 Error Code (Bosch Dishwasher Relay Error)
Meaning: Bosch dishwasher relay malfunction; issue with the relay controlling heating or draining functions, disrupting normal operation.
E02 Error Code (Bosch Dishwasher Water Supply Error)
Meaning: Water supply issue; the dishwasher is not filling with water due to a blocked inlet valve, low water pressure, or hose obstruction.
E03 Error Code (Bosch Dishwasher Drainage Error)
Meaning: Drain pump malfunction; water not draining from the dishwasher due to a clogged pump, hose obstruction, or pump motor failure.
E04 Error Code (Bosch Dishwasher Heating Element Error)
Meaning: Heating element failure; failure to heat water, affecting wash or rinse performance due to a faulty element or thermostat.
E05 Error Code (Bosch Dishwasher Water Temperature Error)
Meaning: Incorrect water temperature; sensor malfunction, thermostat issue, or heating element failure affecting wash quality.
E06 Error Code (Bosch Dishwasher Door Switch Error)
Meaning: Door switch failure; dishwasher unable to detect if the door is properly closed, preventing cycle initiation.
E07 Error Code (Bosch Dishwasher Flow Meter Error)
Meaning: Flow meter malfunction; incorrect water flow detection affecting water level control and cycle operation.
E08 Error Code (Bosch Dishwasher Water Leakage Error)
Meaning: Water leakage detected; internal leak from hoses, pump, or door seal, causing flooding or water pooling in the base.
E09 Error Code (Bosch Dishwasher Overflow Error)
Meaning: Dishwasher overfill detected; failure in the float switch or pressure switch, causing excessive water flow into the dishwasher.
E10 Error Code (Bosch Dishwasher Pressure Sensor Error)
Meaning: Pressure sensor failure; incorrect water level detection caused by a malfunctioning pressure switch or sensor.
E11 Error Code (Bosch Dishwasher Communication Error)
Meaning: Communication failure between the main control board and other components, disrupting dishwasher operation.
E12 Error Code (Bosch Dishwasher Drain Pump Error)
Meaning: Drain pump malfunction; failure to pump out water during or after washing cycles due to a blocked or broken pump.
E13 Error Code (Bosch Dishwasher Short Circuit Error)
Meaning: Short circuit detected; wiring failure or component malfunction causing an electrical fault that prevents operation.
E14 Error Code (Bosch Dishwasher Thermistor Error)
Meaning: Thermistor failure; malfunctioning temperature sensor causing improper temperature regulation or wash cycle disruption.
E15 Error Code (Bosch Dishwasher Drying System Error)
Meaning: Drying cycle failure; issue with the fan, heating element, or venting system preventing proper drying of dishes.
E16 Error Code (Bosch Dishwasher Cycle Error)
Meaning: Cycle malfunction; failure to complete washing or rinsing stages due to faulty control board, motor, or sensor.
E17 Error Code (Bosch Dishwasher Detergent Dispenser Error)
Meaning: Detergent dispenser failure; inability to release detergent properly due to a malfunctioning dispenser or sensor.
E18 Error Code (Bosch Dishwasher Water Pressure Error)
Meaning: Low or high water pressure detected; issues with the water supply or pressure switch affecting proper cycle functioning.
E19 Error Code (Bosch Dishwasher Overflow Error)
Meaning: Water overflow detected; caused by a malfunctioning float switch or improper water intake, triggering safety mechanisms.
E20 Error Code (Bosch Dishwasher Vent Error)
Meaning: Venting system failure; blockage or malfunction in the drying vent, leading to poor drying performance.

Bosch Oven Error Codes

E01 Error Code (Bosch Oven Keypad Error)
Meaning: Bosch oven keypad or touchpad malfunction; unresponsive or stuck buttons, often caused by moisture, debris, or wiring issues.
E02 Error Code (Bosch Oven Temperature Sensor Error)
Meaning: Temperature sensor malfunction; inaccurate readings causing improper temperature regulation during cooking.
E03 Error Code (Bosch Oven Door Lock Error)
Meaning: Oven door lock failure; issue with the self-cleaning door lock mechanism, preventing the oven from locking or unlocking properly.
E04 Error Code (Bosch Oven Defrost Error)
Meaning: Problem with the oven’s defrost function; possible malfunction in the defrost sensor, heater, or timer.
E05 Error Code (Bosch Oven Fan Error)
Meaning: Fan motor failure; failure of the cooling fan, convection fan, or fan wiring causing the oven to overheat or cook unevenly.
E06 Error Code (Bosch Oven Heating Element Error)
Meaning: Heating element malfunction; either the bake or broil element not working, causing uneven or insufficient heat.
E07 Error Code (Bosch Oven Relay Error)
Meaning: Relay board malfunction; failure to properly control the heating elements, fan, or door lock during cycles.
E08 Error Code (Bosch Oven Oven Sensor Error)
Meaning: Oven sensor failure; malfunctioning oven temperature sensor affecting cooking times and temperature regulation.
E09 Error Code (Bosch Oven Communication Error)
Meaning: Communication failure between the oven's control board and other components, such as the fan or heating elements.
E10 Error Code (Bosch Oven Self-Cleaning Error)
Meaning: Self-cleaning cycle failure; issue with the door lock or temperature sensor, preventing the oven from entering self-clean mode.
E11 Error Code (Bosch Oven Voltage Error)
Meaning: Voltage fluctuation or power surge affecting the oven’s control system, often resulting in an operational failure.
E12 Error Code (Bosch Oven Timer Error)
Meaning: Timer malfunction; failure to properly start, stop, or reset the oven timer due to a defective control board.
E13 Error Code (Bosch Oven Gas Valve Error - Gas Models)
Meaning: Gas valve failure; malfunctioning valve preventing gas from flowing to the burner, causing no heat generation in gas ovens.
E14 Error Code (Bosch Oven Door Switch Error)
Meaning: Door switch malfunction; oven cannot detect when the door is properly closed, disrupting operation or causing safety concerns.
E15 Error Code (Bosch Oven Igniter Error - Gas Models)
Meaning: Igniter failure; failure to ignite the gas burner, causing the oven to not heat properly in gas ovens.
E16 Error Code (Bosch Oven Door Temperature Error)
Meaning: Door temperature sensor malfunction; incorrect detection of door temperature, potentially leading to safety issues during cooking.
E17 Error Code (Bosch Oven High Temperature Error)
Meaning: Oven exceeding safe temperature limits; malfunction in the temperature sensor or thermostat leading to excessive heat buildup.
E18 Error Code (Bosch Oven Fan Relay Error)
Meaning: Fan relay failure; failure in the relay controlling the fan, preventing it from circulating air during cooking.
E19 Error Code (Bosch Oven Oven Function Error)
Meaning: A malfunction in the oven’s main functions; failure to reach the set temperature or complete a cooking cycle due to a control board issue.
LOC Error Code (Bosch Oven Control Lock Activated)
Meaning: Control lock feature enabled; oven buttons or settings are locked to prevent accidental operation, typically for safety purposes.

Bosch Microwave Error Codes

F1 Error Code (Bosch Microwave Control Board Error)
Meaning: Bosch microwave control board malfunction; failure in communication between the control board and microwave components affecting operation.
F2 Error Code (Bosch Microwave Door Switch Error)
Meaning: Door switch failure; microwave unable to detect if the door is properly closed, preventing operation.
F3 Error Code (Bosch Microwave Temperature Sensor Error)
Meaning: Temperature sensor malfunction; inaccurate temperature readings, potentially causing overheating or improper cooking.
F4 Error Code (Bosch Microwave Magnetron Error)
Meaning: Magnetron failure; failure to generate microwave energy for cooking, resulting in no heat or improper cooking.
F5 Error Code (Bosch Microwave Relay Error)
Meaning: Relay board malfunction; a stuck or defective relay causing the microwave to fail to start or interrupt cooking cycles.
F6 Error Code (Bosch Microwave Humidity Sensor Error)
Meaning: Humidity sensor malfunction; failure to detect moisture levels correctly, leading to incorrect cooking times or overcooking.
F7 Error Code (Bosch Microwave Communication Error)
Meaning: Communication failure between the control board and other components, disrupting microwave functions.
F8 Error Code (Bosch Microwave Motor Error)
Meaning: Motor malfunction; turntable or fan motor failure preventing rotation or proper air circulation inside the microwave.
F9 Error Code (Bosch Microwave Short Circuit Error)
Meaning: Electrical short detected; caused by faulty wiring, damaged components, or power surges affecting the microwave’s operation.
F10 Error Code (Bosch Microwave Power Supply Error)
Meaning: Power supply problem; unstable or insufficient voltage causing the microwave to reset or fail to operate.
F11 Error Code (Bosch Microwave Overheating Error)
Meaning: Overheating detected; failure in the cooling system or blocked vents causing excessive internal heat.
F12 Error Code (Bosch Microwave Fuse Error)
Meaning: Microwave fuse blown; caused by electrical surges, overheating, or faulty internal components.
F13 Error Code (Bosch Microwave Touchpad Error)
Meaning: Touchpad malfunction; buttons unresponsive or stuck, preventing the microwave from responding to inputs.
F14 Error Code (Bosch Microwave Timer Error)
Meaning: Timer malfunction; failure in the timer circuit causing incorrect or failed cooking times.
F15 Error Code (Bosch Microwave Cooling Fan Error)
Meaning: Cooling fan failure; failure to circulate air properly, causing the microwave to overheat or shut down.
F16 Error Code (Bosch Microwave Door Lock Error)
Meaning: Door lock malfunction; failure to secure the door properly during operation, preventing the microwave from starting.
F17 Error Code (Bosch Microwave Internal Short Circuit)
Meaning: Internal short circuit detected; an electrical fault or damaged component causing the microwave to fail.
F18 Error Code (Bosch Microwave Motor Relay Error)
Meaning: Motor relay failure; problem with controlling the turntable or fan motor, causing them to stop working.
F19 Error Code (Bosch Microwave Overcurrent Error)
Meaning: Overcurrent detected; electrical overload or faulty component causing the microwave to shut down for safety.
LOC Error Code (Bosch Microwave Control Lock Activated)
Meaning: Control lock feature activated; microwave buttons or settings are locked to prevent accidental operation, often for child safety.

Thermador Refrigerator Error Codes

E1 Error Code (Thermador Refrigerator Temperature Sensor Error)
Meaning: Thermador refrigerator temperature sensor malfunction; incorrect temperature readings in the fridge or freezer due to a faulty thermistor or wiring issue.
E2 Error Code (Thermador Refrigerator Freezer Temperature Error)
Meaning: Freezer temperature sensor issue; malfunctioning sensor causing incorrect readings, leading to improper cooling in the freezer section.
E3 Error Code (Thermador Refrigerator Door Switch Error)
Meaning: Door switch malfunction; failure in detecting if the door is properly closed, which can disrupt cooling and trigger alarms.
E4 Error Code (Thermador Refrigerator Defrost Sensor Error)
Meaning: Defrost sensor malfunction; issue with the defrost cycle, potentially causing frost buildup or uneven cooling in the refrigerator or freezer.
E5 Error Code (Thermador Refrigerator Defrost Heater Error)
Meaning: Defrost heater failure; failure in the heater element during the defrost cycle, causing frost accumulation and cooling problems.
E6 Error Code (Thermador Refrigerator Water Inlet Valve Error)
Meaning: Water inlet valve malfunction; issue with water flow to the ice maker or water dispenser due to a clogged or faulty valve.
E7 Error Code (Thermador Refrigerator Condenser Fan Error)
Meaning: Condenser fan motor failure; improper ventilation, affecting the refrigerator's cooling performance and causing overheating.
E8 Error Code (Thermador Refrigerator Ice Maker Error)
Meaning: Ice maker malfunction; issues with the ice maker motor, water supply, or ice tray causing production failures or jams.
E9 Error Code (Thermador Refrigerator Compressor Error)
Meaning: Compressor failure; cooling system issues due to a malfunctioning compressor, which may require repair or replacement.
F1 Error Code (Thermador Refrigerator High Temperature Error)
Meaning: High temperature detected; cooling system failure, door left open, or issues with the compressor causing the temperature to exceed normal levels.
F2 Error Code (Thermador Refrigerator Low Temperature Error)
Meaning: Low temperature detected; cooling issues due to a malfunctioning thermostat, sensor, or compressor causing excessive cooling.
F3 Error Code (Thermador Refrigerator Refrigeration System Error)
Meaning: Refrigeration system malfunction; possible refrigerant leak, compressor issue, or blocked airflow disrupting cooling performance.
F4 Error Code (Thermador Refrigerator Fan Motor Error)
Meaning: Internal fan motor failure; failure of the evaporator or condenser fan, causing inadequate airflow and improper cooling.
F5 Error Code (Thermador Refrigerator Flow Meter Error)
Meaning: Flow meter malfunction; inaccurate water flow detection, affecting the ice maker or water dispenser operation.
F6 Error Code (Thermador Refrigerator Air Circulation Error)
Meaning: Poor air circulation detected; malfunction in the air circulation system leading to uneven cooling inside the refrigerator.
F7 Error Code (Thermador Refrigerator Door Seal Error)
Meaning: Door seal failure; damaged or worn door seal causing cold air leakage and reduced cooling efficiency.
F8 Error Code (Thermador Refrigerator Drainage Error)
Meaning: Drainage system malfunction; clogged or faulty defrost drain causing water pooling inside the refrigerator.
F9 Error Code (Thermador Refrigerator Water Filter Error)
Meaning: Water filter issue; clogged or improperly installed filter affecting water flow to the dispenser and ice maker.
F10 Error Code (Thermador Refrigerator Electrical Supply Error)
Meaning: Voltage fluctuation or power supply issue; electrical instability causing the refrigerator to malfunction or reset unexpectedly.
F11 Error Code (Thermador Refrigerator Communication Error)
Meaning: Communication failure between the main control board and other components; wiring or control board issues disrupting refrigerator performance.

Thermador Cooktop Error Codes

E1 Error Code (Thermador Cooktop Temperature Sensor Error)
Meaning: Temperature sensor malfunction; inaccurate temperature readings causing improper cooking results or overheating on the cooktop surface.
E2 Error Code (Thermador Cooktop Overheating Error)
Meaning: Overheating detected; malfunction in the temperature sensor or control system, causing the cooktop to exceed safe temperature limits.
E3 Error Code (Thermador Cooktop Short Circuit Error)
Meaning: Short circuit detected; an electrical fault in the cooktop wiring or components causing a safety shutdown.
E4 Error Code (Thermador Cooktop Cooling Fan Error)
Meaning: Cooling fan failure; failure of the fan to operate correctly, causing excessive heat buildup that affects the cooktop’s performance.
E5 Error Code (Thermador Cooktop Control Board Error)
Meaning: Control board malfunction; failure in communication or processing by the control board, disrupting cooktop functions.
E6 Error Code (Thermador Cooktop Power Supply Error)
Meaning: Power supply issue; low or fluctuating voltage affecting the cooktop’s ability to operate correctly.
E7 Error Code (Thermador Cooktop Sensor Error)
Meaning: Sensor malfunction; failure in the cooktop’s heat or temperature sensor, causing incorrect temperature readings.
E8 Error Code (Thermador Cooktop Element Fault)
Meaning: Heating element failure; malfunctioning or damaged element preventing proper heating during cooking.
E9 Error Code (Thermador Cooktop Induction Error)
Meaning: Induction cooktop malfunction; error in the induction system, such as a sensor or connection failure preventing proper cooking.
F1 Error Code (Thermador Cooktop Keypad Error)
Meaning: Keypad or touchpad malfunction; unresponsive or stuck buttons due to moisture, electrical issues, or control board failure.
F2 Error Code (Thermador Cooktop Low Voltage Error)
Meaning: Low voltage detected; insufficient power supply causing the cooktop to operate improperly or fail to start.
F3 Error Code (Thermador Cooktop High Voltage Error)
Meaning: High voltage detected; electrical surge or power fluctuation causing the cooktop to shut down as a safety precaution.
F4 Error Code (Thermador Cooktop Overcurrent Error)
Meaning: Overcurrent detected; excessive current being drawn by the cooktop’s components, often due to a fault or malfunction.
F5 Error Code (Thermador Cooktop Communication Error)
Meaning: Communication failure between the control board and other components, leading to an interruption in the cooktop’s functions.
F6 Error Code (Thermador Cooktop Temperature Regulation Error)
Meaning: Failure in the temperature regulation system; inaccurate or inconsistent heating during cooking due to a faulty sensor or control system.
F7 Error Code (Thermador Cooktop Surface Overheat Error)
Meaning: Surface temperature too high; cooktop surface exceeds safe operating temperatures due to sensor or cooling issues.
F8 Error Code (Thermador Cooktop Element Control Error)
Meaning: Heating element control failure; an issue with regulating the heat output of one or more cooktop elements.
F9 Error Code (Thermador Cooktop Fan Control Error)
Meaning: Fan control malfunction; failure in controlling the cooling fan, leading to excessive heat buildup and potential damage.
LOC Error Code (Thermador Cooktop Lock Error)
Meaning: Control lock engaged; child safety lock or control lock preventing the cooktop from being operated or adjusted.
E10 Error Code (Thermador Cooktop Temperature Limit Error)
Meaning: Temperature limit exceeded; the cooktop has detected a safety concern, such as excessive heat, triggering a safety shutdown.

Thermador Dishwasher Error Codes

E1 Error Code (Thermador Dishwasher Water Supply Error)
Meaning: Water supply issue; the dishwasher is not filling with water due to a clogged inlet valve, low water pressure, or a blocked hose.
E2 Error Code (Thermador Dishwasher Drainage Error)
Meaning: Drain pump malfunction; water is not draining properly due to a clogged drain hose, faulty pump, or an obstruction in the pump system.
E3 Error Code (Thermador Dishwasher Heating Error)
Meaning: Heating element failure; water is not heating to the required temperature for washing, possibly due to a faulty heating element or thermostat.
E4 Error Code (Thermador Dishwasher Overflow Error)
Meaning: Overflow detected; water is exceeding the designated level, likely caused by a malfunctioning float switch or pressure sensor.
E5 Error Code (Thermador Dishwasher Door Switch Error)
Meaning: Door switch malfunction; the dishwasher cannot detect if the door is properly closed, preventing operation or triggering a safety feature.
E6 Error Code (Thermador Dishwasher Wash Motor Error)
Meaning: Wash motor failure; the dishwasher is not circulating water properly, which may be caused by a motor issue or electrical failure.
E7 Error Code (Thermador Dishwasher Drain Pump Error)
Meaning: Drain pump failure; the pump is not effectively draining water from the dishwasher, possibly due to a clogged or broken pump.
E8 Error Code (Thermador Dishwasher Sensor Error)
Meaning: Sensor malfunction; an error with the water temperature sensor, flow sensor, or pressure sensor affecting cycle timing and wash efficiency.
E9 Error Code (Thermador Dishwasher Circuit Board Error)
Meaning: Circuit board malfunction; failure of the control board to communicate with other components, disrupting the dishwasher’s functions.
F1 Error Code (Thermador Dishwasher Flood Detection)
Meaning: Flood detected; water has leaked into the base of the dishwasher, triggering the flood switch to prevent further damage.
F2 Error Code (Thermador Dishwasher Low Water Error)
Meaning: Low water level detected; insufficient water in the dishwasher, possibly due to a water supply issue, inlet valve failure, or plumbing obstruction.
F3 Error Code (Thermador Dishwasher Motor Control Error)
Meaning: Motor control failure; a malfunction in the motor control system prevents the motor from operating properly, causing wash cycle issues.
F4 Error Code (Thermador Dishwasher Pressure Switch Error)
Meaning: Pressure switch malfunction; the pressure switch is not detecting the correct water levels, leading to incorrect wash cycle behavior.
F5 Error Code (Thermador Dishwasher Rinse Aid Error)
Meaning: Rinse aid dispenser malfunction; failure to release rinse aid properly, affecting drying and cleanliness of dishes.
F6 Error Code (Thermador Dishwasher Door Seal Error)
Meaning: Door seal failure; the door seal is compromised, allowing water to leak during the wash cycle.
F7 Error Code (Thermador Dishwasher Fan Error)
Meaning: Drying fan malfunction; the fan in the drying system is not working, leading to poor drying performance and wet dishes after the cycle.
F8 Error Code (Thermador Dishwasher Vent Error)
Meaning: Vent malfunction; the drying vent is blocked or not functioning properly, preventing moisture from escaping during the drying cycle.
F9 Error Code (Thermador Dishwasher Electrical Supply Error)
Meaning: Electrical supply issue; voltage fluctuation or power loss causing the dishwasher to stop functioning.
LOC Error Code (Thermador Dishwasher Lock Error)
Meaning: Control lock engaged; the dishwasher’s control panel is locked, preventing cycle changes or operation, typically due to child safety settings.
E10 Error Code (Thermador Dishwasher Temperature Limit Error)
Meaning: Temperature regulation failure; the water temperature exceeds the safe limit, possibly due to a malfunctioning thermostat or temperature sensor.

Thermador Wall Oven Error Codes

E1 Error Code (Thermador Wall Oven Keypad Error)
Meaning: Thermador wall oven keypad malfunction; unresponsive or stuck buttons due to moisture, debris, or control board issues.
E2 Error Code (Thermador Wall Oven Temperature Sensor Error)
Meaning: Temperature sensor malfunction; faulty sensor or wiring causing inaccurate temperature readings, leading to improper cooking.
E3 Error Code (Thermador Wall Oven Door Lock Error)
Meaning: Door lock malfunction; failure of the oven’s door lock system, typically during self-cleaning cycles, preventing the door from locking or unlocking.
E4 Error Code (Thermador Wall Oven Overheating Error)
Meaning: Overheating detected; excessive heat caused by a malfunctioning thermostat, sensor, or blocked ventilation.
E5 Error Code (Thermador Wall Oven Self-Clean Error)
Meaning: Self-cleaning cycle failure; issue with the oven’s temperature sensor or door lock system preventing the self-clean cycle from completing.
E6 Error Code (Thermador Wall Oven Fan Error)
Meaning: Oven fan malfunction; failure of the fan motor to circulate air, causing uneven cooking temperatures or oven overheating.
E7 Error Code (Thermador Wall Oven Relay Error)
Meaning: Relay malfunction; a problem with the relay board preventing proper control of heating elements, fans, or other oven functions.
E8 Error Code (Thermador Wall Oven Control Board Error)
Meaning: Control board failure; a communication error between the oven’s control board and other components, disrupting normal operation.
E9 Error Code (Thermador Wall Oven Heating Element Error)
Meaning: Heating element failure; a malfunction in the bake or broil elements causing uneven heating or the oven failing to heat at all.
F1 Error Code (Thermador Wall Oven Door Switch Error)
Meaning: Door switch malfunction; the oven is unable to detect whether the door is properly closed, causing the oven to stop working.
F2 Error Code (Thermador Wall Oven Door Lock Error)
Meaning: The oven's door lock system during self-cleaning cycles is malfunctioning, preventing the oven door from locking correctly.
F3 Error Code (Thermador Wall Oven Oven Temperature Error)
Meaning: Oven temperature sensor or thermistor malfunction; inaccurate temperature readings causing inconsistent cooking results.
F4 Error Code (Thermador Wall Oven Fan Motor Error)
Meaning: Fan motor failure; inadequate circulation of air inside the oven leading to poor cooking performance or overheating.
F5 Error Code (Thermador Wall Oven Ignition Error)
Meaning: Gas oven ignition failure; the igniter or spark system is not functioning, preventing the oven from lighting or reaching the desired temperature.
F6 Error Code (Thermador Wall Oven Voltage Error)
Meaning: Power supply or voltage issue; an unstable or insufficient voltage supply preventing the oven from functioning properly.
F7 Error Code (Thermador Wall Oven Control Panel Error)
Meaning: Control panel malfunction; failure of the touchpad, user interface, or control board preventing proper operation of the oven.
F8 Error Code (Thermador Wall Oven Gas Valve Error)
Meaning: Gas valve malfunction; failure to release gas to the burner, causing the oven not to heat properly in gas models.
F9 Error Code (Thermador Wall Oven Temperature Limit Error)
Meaning: The oven has exceeded safe temperature limits, often due to a thermostat or temperature sensor issue, causing the oven to shut down for safety.
LOC Error Code (Thermador Wall Oven Control Lock Activated)
Meaning: Control lock is enabled; the oven’s settings are locked for safety, preventing any adjustments to the cooking cycle.
F10 Error Code (Thermador Wall Oven Self-Cleaning Error)
Meaning: Failure in the self-cleaning function; an issue with the lock mechanism, temperature sensor, or control system preventing the cycle from completing properly.

Thermador Range Error Codes

E1 Error Code (Thermador Range Keypad Error)
Meaning: Thermador range keypad or touchpad malfunction; unresponsive or stuck buttons, often caused by moisture, debris, or wiring issues.
E2 Error Code (Thermador Range Temperature Sensor Error)
Meaning: Temperature sensor malfunction; inaccurate or inconsistent temperature readings, leading to improper cooking or overheating.
E3 Error Code (Thermador Range Door Lock Error)
Meaning: Door lock malfunction; issue with the door lock system, particularly during self-clean cycles, preventing the oven door from locking or unlocking.
E4 Error Code (Thermador Range Overheating Error)
Meaning: Overheating detected; the oven has exceeded safe temperature limits, caused by a malfunctioning thermostat, temperature sensor, or fan.
E5 Error Code (Thermador Range Self-Clean Error)
Meaning: Self-cleaning cycle failure; issues with the door lock, temperature sensor, or control board preventing the oven from completing the self-clean function.
E6 Error Code (Thermador Range Fan Error)
Meaning: Fan malfunction; failure of the oven fan to circulate air properly, leading to uneven cooking or overheating.
E7 Error Code (Thermador Range Relay Error)
Meaning: Relay board malfunction; failure in the relay controlling heating elements, fan motors, or other components, causing an operational failure.
E8 Error Code (Thermador Range Control Board Error)
Meaning: Control board failure; communication error between the oven's control board and other components, disrupting operation.
E9 Error Code (Thermador Range Heating Element Error)
Meaning: Heating element failure; the oven's bake or broil elements are not functioning, causing uneven heating or the oven not heating at all.
F1 Error Code (Thermador Range Door Switch Error)
Meaning: Door switch malfunction; the range cannot detect whether the door is properly closed, causing safety concerns or preventing operation.
F2 Error Code (Thermador Range Ignition Error - Gas Models)
Meaning: Ignition failure; the gas burner will not ignite due to a faulty igniter, spark system, or gas valve.
F3 Error Code (Thermador Range Oven Temperature Error)
Meaning: Oven temperature sensor or thermistor malfunction; the oven fails to maintain the correct temperature, leading to poor cooking performance.
F4 Error Code (Thermador Range Fan Motor Error)
Meaning: Oven fan motor failure; failure in the motor that circulates air inside the oven, affecting cooking results and causing overheating.
F5 Error Code (Thermador Range Gas Valve Error - Gas Models)
Meaning: Gas valve failure; the gas burner will not receive gas, preventing the oven from lighting or heating properly.
F6 Error Code (Thermador Range Voltage Error)
Meaning: Voltage supply issue; unstable or insufficient voltage affects the oven's performance, preventing it from starting or operating properly.
F7 Error Code (Thermador Range Control Panel Error)
Meaning: Control panel malfunction; failure in the touchpad, display, or buttons that prevents the proper operation of the range.
F8 Error Code (Thermador Range Gas Supply Error)
Meaning: Gas supply issue; the range is not receiving gas, which could be due to a clogged valve, supply line issue, or malfunctioning control board.
F9 Error Code (Thermador Range Temperature Limit Error)
Meaning: The oven temperature has exceeded safe limits, potentially due to a malfunctioning thermostat, temperature sensor, or overheating of the unit.
LOC Error Code (Thermador Range Control Lock Activated)
Meaning: Control lock is engaged; the range's controls are locked to prevent accidental operation, typically for safety or child-proofing.
F10 Error Code (Thermador Range Self-Cleaning Error)
Meaning: Self-clean cycle issue; a malfunction in the lock mechanism, heating element, or control board preventing the self-cleaning function from completing.

Thermador Microwave Error Codes

E1 Error Code (Thermador Microwave Keypad Error)
Meaning: Thermador microwave keypad or touchpad malfunction; unresponsive or stuck buttons, often caused by moisture, debris, or control board failure.
E2 Error Code (Thermador Microwave Temperature Sensor Error)
Meaning: Temperature sensor malfunction; incorrect readings causing improper cooking or overheating.
E3 Error Code (Thermador Microwave Door Switch Error)
Meaning: Door switch failure; the microwave cannot detect if the door is properly closed, preventing operation.
E4 Error Code (Thermador Microwave Magnetron Error)
Meaning: Magnetron failure; the microwave is unable to generate heat due to a malfunctioning magnetron or associated components.
E5 Error Code (Thermador Microwave Relay Error)
Meaning: Relay malfunction; failure in the relay board causing improper functioning of the microwave’s internal components.
E6 Error Code (Thermador Microwave Humidity Sensor Error)
Meaning: Humidity sensor malfunction; failure in detecting moisture levels correctly, leading to incorrect cooking times.
E7 Error Code (Thermador Microwave Motor Error)
Meaning: Motor malfunction; failure of the turntable or fan motor, preventing rotation or air circulation inside the microwave.
E8 Error Code (Thermador Microwave Short Circuit Error)
Meaning: Electrical short detected; caused by faulty wiring, damaged components, or power surges.
E9 Error Code (Thermador Microwave Power Supply Error)
Meaning: Power supply issue; irregular voltage or electrical supply causing the microwave to reset or fail to operate.
F1 Error Code (Thermador Microwave Overheating Error)
Meaning: Overheating detected; failure in the cooling system, blocked vents, or a faulty temperature sensor causing excessive internal heat.
F2 Error Code (Thermador Microwave Fuse Error)
Meaning: Internal fuse blown; caused by electrical surges, overheating, or malfunctioning components preventing microwave operation.
F3 Error Code (Thermador Microwave Timer Error)
Meaning: Timer malfunction; failure in the microwave's timer circuit, causing incorrect cooking times or a failure to start.
F4 Error Code (Thermador Microwave Cooling Fan Error)
Meaning: Cooling fan failure; failure to circulate air properly, causing the microwave to overheat or shut down.
F5 Error Code (Thermador Microwave Touchpad Error)
Meaning: Touchpad or control panel malfunction; unresponsive buttons or failure in the touchpad, preventing proper operation.
F6 Error Code (Thermador Microwave Internal Short Circuit)
Meaning: Internal short circuit; caused by faulty wiring, damaged components, or electrical issues preventing the microwave from functioning.
F7 Error Code (Thermador Microwave Relay Board Error)
Meaning: Relay board malfunction; failure in relays preventing the microwave from heating or initiating certain cycles.
F8 Error Code (Thermador Microwave Motor Relay Error)
Meaning: Motor relay malfunction; failure in controlling the turntable or fan motor, causing improper rotation or airflow.
F9 Error Code (Thermador Microwave Overcurrent Error)
Meaning: Overcurrent detected; excessive current drawn by the microwave due to faulty components or electrical overload.
LOC Error Code (Thermador Microwave Control Lock Activated)
Meaning: Control lock engaged; the microwave’s settings are locked to prevent accidental operation, often for child safety.
E10 Error Code (Thermador Microwave Temperature Limit Error)
Meaning: The microwave has exceeded the safe temperature limit; the internal temperature is too high, possibly due to a malfunctioning sensor or cooling system.